1,069
edits
Changes
Template:FMX640 Thermograph (view source)
Revision as of 10:21, 10 January 2023
, 10:21, 10 January 2023→Configuration
==Configuration==
==Configuration==
Make sure the {{{model|}}} device is configured to receive data from “Transcan2 Reefer”, "Touchprint Reefer" or "DataCold Reefer". To do this, enter the configurator window, select the RS232 \ RS485 section displayed in the screenshots below, and configure accordingly (COM1/COM2 Settings, Mode “Transcan2 Reefer”, "Touchprint Reefer" or "DataCold Reefer", Baudrate: Default)
Make sure the {{{model|}}} device is configured to receive data from “Transcan2 Reefer”, "Touchprint Reefer", "Euroscan: or "DataCold Reefer". To do this, enter the configurator window, select the RS232 \ RS485 section displayed in the screenshots below, and configure accordingly (COM1/COM2 Settings, Mode “Transcan2 Reefer”, "Touchprint Reefer", "Euroscan"or "DataCold Reefer", Baudrate: Default)
[[File:RS-232 refer.png]]
==== DataCold Reefer ====
==== DataCold Reefer ====
To configure "DataCold Reefer" I/O parameters, please select "Reefer IO":
To configure "DataCold Reefer" I/O parameters, please select "Reefer IO":
[[File:ReeferIO.png]]
[[File:Reefer IO settings.png|frameless|1000x1000px]]
Data sending parameters (AVL ID) used for "DataCold Reefer" are these: 10040 - 10649. For more in-depth information, please refer to '''[[{{{model|}}} Teltonika Data Sending Parameters ID#Freezer_IO|Data Sending Parameters page]].'''
Data sending parameters (AVL ID) used for "DataCold Reefer" are these: 10040 - 10649. For more in-depth information, please refer to '''[[{{{model|}}} Teltonika Data Sending Parameters ID#Freezer_IO|Data Sending Parameters page]].'''
==== Transcan2 Reefer ====
==== Transcan2 Reefer ====
To configure "Transcan2 Reefer" I/O parameters, please select "TK Transcom IO":
To configure "Transcan2 Reefer" I/O parameters, please select "TK Transcom IO":
[[File:TranscanIO.png]]
Data sending parameters (AVL ID) used for "Transcan2
" are these: 10683 - 10694. For more in-depth information, please refer to '''[[{{{model|}}} Teltonika Data Sending Parameters ID#Freezer_IO|Data Sending Parameters page]].'''
[[File:Transcom IO settings.png|frameless|1000x1000px]]
==== Euroscan IO====
To configure "Euroscan refeer" I/O parameters select "Euroscan IO":
[[File:EuroScanIO.png]]
Data sending parameters (AVL ID) used for "Transcan2 Reefer" are these: 10683 - 10694. For more in-depth information, please refer to '''[[{{{model|}}} Teltonika Data Sending Parameters ID#Freezer_IO|Data Sending Parameters page]].'''
Data sending parameters (AVL ID) used for "Euroscan" are these: x- X. For more in-depth information, please refer to '''[[{{{model|}}} Teltonika Data Sending Parameters ID#Freezer_IO|Data Sending Parameters page]].'''
==== Touchprint Reefer ====
==== TK Touchprint/Touchlog I/O ====
To configure "Touchprint Reefer" I/O parameters select "TK Touchprint IO":
To configure "Touchprint Reefer" I/O parameters select "TK Touchprint IO":
[[File:Touchprint Reefer IO settings.png|frameless|1000x1000px]]
[[File:TouchprintIO.png]]
Data sending parameters (AVL ID) used for "Touchprint Reefer" are these: 10695 - 10703. For more in-depth information, please refer to '''[[{{{model|}}} Teltonika Data Sending Parameters ID#Freezer_IO|Data Sending Parameters page]].'''
Data sending parameters (AVL ID) used for "Touchprint Reefer" are these: 10695 - 10703. For more in-depth information, please refer to '''[[{{{model|}}} Teltonika Data Sending Parameters ID#Freezer_IO|Data Sending Parameters page]].'''
[[Codec#Codec_8_Extended |Codec 8 Extended]] should be selected as the main data protocol in the “Protocol Settings” tab, which is located in the “System” section.
[[Codec#Codec_8_Extended |Codec 8 Extended]] should be selected as the main data protocol in the “Protocol Settings” tab, which is located in the “System” section.
[[Category:{{{model|}}}]]
[[Category:{{{model|}}}]]
[[Category:{{{model|}}} Manual]]
[[Category:{{{model|}}} Manual]]