0
edits
Changes
→PC Calibration
* NOTE: Before you connect or start calibration, please install RNDIS driver first. LINK: http://movon.co.kr/downloads/rndisdriver.zip (Windows 10)
* NOTE: Before you connect or start calibration, please install RNDIS driver first. LINK: http://movon.co.kr/downloads/rndisdriver.zip (Windows 10)
* Unzip the file and remember the unzipped folder location.
* Unzip the file and remember the unzipped folder location.
* Go to the Device manager and select '''a USB serial Port (COM x)''' under '''Ports (COM & LPT)'''. [[File:Rndis.png|left|450x450px]]
* Go to the Device manager and select '''a USB serial Port (COM x)''' under '''Ports (COM & LPT)'''.
[[File:Rndis.png|450x450px]]
* Click it using the right button of your mouse, then click “Properties”.
[[File:Rndis1.png|450x450px]]
* Click on "Update driver..."
[[File:Rndis2.png|450x450px]]
* Select “Browse my computer for driver software”.
[[File:Rndis3.png|450x450px]]
* Click “Browser…” button and “Browse For Folder” window will pop up. Find rndisdriver and choose it ('''remember the path to where you saved it''').
[[File:Rndis4.png|450x450px]]
* Press “Next” on the page below.
* Press “Next” on the page below.[[File:Rndis5.png|left|450x450px]]
[[File:Rndis5.png|450x450px]]
* The driver should now be installed and visible in device manager:
[[File:Rndis6.png]]
[[File:Dsmsetupnew.jpg]]
[[File:Dsmsetupnew.jpg]]
Once this is done, name the photo with the driver ID or name and keep the document uploaded inside DSM.
Once this is done, name the photo with the driver ID or name and keep the document uploaded inside DSM.
==Mobile connection & calibration==
==Mobile connection & calibration==