Changes

m
Line 3: Line 3:  
[[Image:Fmb120_trip_settings.png|300px|right]]
 
[[Image:Fmb120_trip_settings.png|300px|right]]
   −
Trip window offers user to configure the Trip feature. If Trip is enabled, configuration of Trip parameters is enabled.<br/>''Start Speed'' (km/h) defines the minimum GPS speed in order to detect Trip Start.<br/>''Ignition OFF Timeout'' is the timeout value to detect Trip Stop once the Ignition (configured ignition source) is off.<br/>To use feature ''Distance counting mode'' I/O Trip Odometer must be enabled. When it is set to <span style=color:#F6A83E>Continuous</span>, Trip distance is going to be counted continuously (from Trip start to Trip stop) and is written to I/O ''Trip Odometer'' value field. When Trip is over and next Trip begins, ''Trip Odometer'' value is reset to zero.<br/>When ''Mode'' is set <span style=color:#F6A83E>Between Records</span>, the distance is going to be counted only between every record made. This value is written to I/O ''Trip Odometer'' value field and is reset to zero every new record until the Trip stops. If later all Odometer values are summed up manually, the user gets the distance driven during the whole period of the Trip.<br/>
+
Trip window offers user to configure the Trip feature. If Trip is enabled, configuration of Trip parameters is enabled.<br/>''Start Speed'' defines the minimum GPS speed in order to detect Trip start.<br/>''Ignition OFF Timeout'' is the timeout value to detect Trip Stop once the Ignition (configured ignition source) is off.<br/>To use feature ''Distance counting mode'' I/O Trip Odometer must be enabled. When it is set to <span style=color:#F6A83E>Continuous</span>, Trip distance is going to be counted continuously (from Trip start to Trip stop) and written to I/O ''Trip Odometer'' value field. When Trip is over and the next Trip begins, ''Trip Odometer'' value is reset to zero.<br/>When ''Mode'' is set to <span style=color:#F6A83E>Between Records</span>, the distance is going to be counted between every record made. This value is written to I/O ''Trip Odometer'' value field and is reset to zero every new record until the Trip stops. If later all Odometer values are summed up manually, the user obtains the distance driven during the whole duration of the Trip.<br/>
    
[[Image:Fmb120_trip_mode.png|600px|center]]
 
[[Image:Fmb120_trip_mode.png|600px|center]]