Changes

Users must select [[Codec#Codec 8 Extended|Codec8 Extended]] data type in order to get Mobileye data packets to the server because [[{{{model|FMB6YX}}} Teltonika Data Sending Parameters ID#Mobileye elements|Mobileye I/O AVL ID]]’s are over than 255. This is because of [[Codec#Codec 8 Extended|Codec8 Extended]] can sent 2 bytes data of AVL ID while [[Codec#Codec 8|Codec8]] – 1 byte. This parameter is located in configurator [[{{{model|FMB6YX}}} System settings|System tab]], Protocol Settings.

Users must select [[Codec#Codec 8 Extended|Codec8 Extended]] data type in order to get Mobileye data packets to the server because [[{{{model|FMB6YX}}} Teltonika Data Sending Parameters ID#Mobileye elements|Mobileye I/O AVL ID]]’s are over than 255. This is because of [[Codec#Codec 8 Extended|Codec8 Extended]] can sent 2 bytes data of AVL ID while [[Codec#Codec 8|Codec8]] – 1 byte. This parameter is located in configurator [[{{{model|FMB6YX}}} System settings|System tab]], Protocol Settings.

When [[Codec#Codec 8 Extended|Codec8 Extended]] type is selected [[{{{model|FMB6YX}}} Teltonika Data Sending Parameters ID#Mobileye elements|Mobileye I/O]] elements could be selected.  

When [[Codec#Codec 8 Extended|Codec8 Extended]] type is selected [[{{{model|FMB6YX}}} AVL ID#Mobileye elements|Mobileye I/O]] elements could be selected.  

<br>[[File:FMB640 Codec8Extended tab 1.png]]

<br>[[File:FMB640 Codec8Extended tab 1.png]]

'''Note:''' Mobileye data will be sent together with periodical AVL records. <br> <br>

'''Note:''' Mobileye data will be sent together with periodical AVL records. <br> <br>

'''Note:''' ME TSR IO elements are not parsed in {{{model|FMB6YX}}} device, they must be parsed according to Mobileye documentation, because {{{model|FMB6YX}}} will send 8 bytes size RAW data of those parameters. All other elements are already parsed and showing correct values. Simply select elements that you want to get and generation type as other [[{{{model|FMB6YX}}} AVL ID#Permanent I.2FO elements|{{{model|FMB6YX}}} I/O]] elements. <br>

'''Note:''' ME TSR IO elements are not parsed in {{{model|FMB6YX}}} device, they must be parsed according to Mobileye documentation, because {{{model|FMB6YX}}} will send 8 bytes size RAW data of those parameters. All other elements are already parsed and showing correct values. Simply select elements that you want to get and generation type as other [[{{{model|FMB6YX}}} Teltonika_Data_Sending_Parameters_ID#Permanent_I.2FO_elements|{{{model|FMB6YX}}} I/O]] elements. <br>

[[File:FMB640 Mobileye IO elements v1.png|800x800px]]<br>

[[File:FMB640 Mobileye IO elements v1.png|800x800px]]<br>