Changes

DashCam First Start (view source)

Revision as of 10:08, 20 March 2023

480 bytes removed , 10:08, 20 March 2023

no edit summary

Line 1: Line 1:

__TOC__

==How to insert SD card==

−

Teltonika ~~DualCam~~ can hold 2 x microSD ~~cards~~, which are inserted on both sides of the camera (front ~~and rear~~).

+

Teltonika DashCam can hold 1 x microSD card, which are inserted on both sides of the camera (front).

When the card is inserted correctly, it locks in with a "click". How the cards are inserted is depicted in the photos.

−

'''NOTE:''' If you do not insert microSD ~~cards~~, you will be only available to receive images, but you do not receive video if the trigger will happen or you will send SMS/GPRS command.

+

'''NOTE:''' If you do not insert microSD card, you will be only available to receive images, but you do not receive video if the trigger will happen or you will send SMS/GPRS command.

[[image:Dual_camera_MicroSD_card_insert_1.png|400px]]

Line 14: Line 14:

* Camera must be mounted as shown in the picture below, you can stick it to window using 3M duct tape, or you can use screws fit to other surfaces.

[[File:Dualcam mounting.jpeg|371x371px]]

−

* To maximize the field of view, the camera should be mounted in the middle of the front windshield so that an even field of view for the sides of the vehicle is recorded. We recommend you mount the ~~Dual Cam~~ near the rearview mirror area.

+

* To maximize the field of view, the camera should be mounted in the middle of the front windshield so that an even field of view for the sides of the vehicle is recorded. We recommend you mount the DashCam near the rearview mirror area.

* We always recommend angling the lens slightly upwards so that video footage displays about 60% road and 40% sky. This angle offers a good balance of exposure and details.

−

* View footage from SD card while mounting the ~~Dual Cam~~ so you can select what position and angle you prefer the ~~Dual Cam~~ to be set at.

+

* View footage from SD card while mounting the DashCam so you can select what position and angle you prefer the DashCam to be set at.

−

~~Rear camera adjusting:~~

−

~~[[image:Dual camera rotation 1.png|200px]]~~

−

~~[[image:Dual camera rotation 2.png|200px]]~~

−

~~[[image:Dual camera rotation 3.png|200px]]~~

−

~~[[image:Dual camera rotation 4.png|200px]]~~

−

* Gently remove the cover from the case of the top camera. After the cover is removed you will see the screw.

−

* Unscrew it and rotate the rear camera to adjust the better view of the cabin. The rear camera contains infrareds on it.

−

* Put the cover back on the camera.

Connecting power source:

Line 37: Line 29:

==Installation==

−

To connect the ~~DualCam~~ to a supported device, you have to make sure to connect 4 PINs of the camera to the PINs of your device correctly.

+

To connect the DashCam to a supported device, you have to make sure to connect 4 PINs of the camera to the PINs of your device correctly.

−

'''NOTE:''' ~~Dual Cam~~ must be connected to the ignition source or another source, where then you turn off ignition camera will turn off in another case camera will drain the battery if you connect directly.

+

'''NOTE:''' DashCam must be connected to the ignition source or another source, where then you turn off ignition camera will turn off in another case camera will drain the battery if you connect directly.

[[File:443035 Teltonika DualCam Wiki Knowledge Base Teltonika GPS 1.2.jpg|frameless|928x928px]]

−

If you need to receive additional data from the ~~DualCam~~ when the ignition is off, you can do it by connecting the camera to a power source using the relay, to control the power supply by turning on/off the camera. To find information on how to configure DOUT, please visit [https://wiki.teltonika-gps.com/view/FMB_setdigout FMB DOUT].

+

If you need to receive additional data from the DashCam when the ignition is off, you can do it by connecting the camera to a power source using the relay, to control the power supply by turning on/off the camera. To find information on how to configure DOUT, please visit [https://wiki.teltonika-gps.com/view/FMB_setdigout FMB DOUT].

[[File:Reley2.PNG|frameless|928x928px]]

Line 57: Line 49:

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |1

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |'''RS232-Tx'''

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |~~DualCam~~ output for data transmission through RS232

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Dashcam output for data transmission through RS232

|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |2

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |'''RS232-Rx'''

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |~~DualCam~~ input for data reception through RS232

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |DashCam input for data reception through RS232

|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |3

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |'''VCC(9-36V)''' (+)

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Power supply for the ~~DualCam~~

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Power supply for the DashCam

|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |4

Line 74: Line 66:

−

[[Category:Teltonika ~~DualCam~~]]

+

[[Category:Teltonika DashCam]]

Edgar.dementenko

Administrators

1,645

edits