0
edits
Changes
Created page with "__TOC__ When no I/O element is enabled, AVL packet comes with GNSS information only. After enabling I/O element(s) AVL packet contains current value(s) of enabled I/O element..."
__TOC__
When no I/O element is enabled, AVL packet comes with GNSS information only. After enabling I/O element(s) AVL packet contains current value(s) of enabled I/O element(s) along with GNSS information.
==Input Name==
I/O element name.
==Current Value==
If device is connected to '''Configurator''' all current I/O values are displayed in this column. Also I/O current values can be seen in [[{{{model|FMB1YX}}}_Status_info#I.2FO_Info|Status→I/O Info]] tab.
==Units==
Units of measurement.
==Priority==
This field allows to enable I/O elements and setting them a priority so they are added to the data packet, which is sent to the server. By default '''{{{txt_count|7}}} I/O elements''' with '''Low priority''' are enabled: <code> {{{txt_elems|}}} GSM Signal, GNSS Status, GNSS PDOP, GNSS HDOP, Speed, Battery Voltage, Active GSM Operator {{{txt_elems|}}}</code>. All records made by {{{model|FMB1YX}}} are regular, and regular packets are sent as low priority records.<p>Priority level (AVL packet priority) can be:</p>
===None Priority===
Module doesn't make additional record.
===Low Priority===
Module makes an additional record with an indication that the '''event was caused by an I/O element change''' (depending onas [[#Operands|Operands]] configuration).
==High and Low Level==
These levels define I/O value range. If I/O value '''enters or exits''' this range, {{{model|FMB1YX}}} '''generates an event'''.
==Event Only==
When this is selected, I/O element status value will be '''appended only to eventual records''', otherwise I/O element status value will appear in each AVL record.
==Operands==
Defines when to generate event: [[#Operand On Exit|On Exit]], [[#Operand On Entrance|On Entrance]], [[#Operand On Both|On Both]], [[#Operand Monitoring|Monitoring]], [[#Operand On Hysteresis|On Hysteresis]], [[#Operand On Change|On Change]] or [[#Operand On Delta Change|On Delta Change]].
===Operand On Exit===
Record is generated when input value leaves a range between low and high level limits.
[[Image:Fmb120_on_exit.png|x150px|none]]
===Operand On Entrance===
----
Record is generated when input value enters a range between low and high level limits.
[[Image:Fmb120_on_entrance.png|x150px|none]]
===Operand On Both===
----
Record is generated by both ''On Exit'' and ''On Entrance'' operands' logic at same time.
[[Image:Fmb120_on_both.png|x150px|none]]
===Operand Monitoring===
----
No event at all. Values are recorded only when other triggers worked.
[[Image:Fmb120_operand_monitoring.png|x150px|none]]
===Operand On Hysteresis===
----
Record is generated when input value crosses the high limit value from below the low limit value or vice versa.
[[Image:Fmb120_on_hysteresis.png|350px|none]]
===Operand On Change===
----
Record is generated when input value changes.
[[Image:Fmb120_on_change.png|x150px|none]]
===Operand On Delta Change===
----
Record is generated when input value changes and the absolute change becomes equal to or higher than the limit value.
[[Image:Fmb120_on_delta_change.png|x150px|none]]
==Avg Const==
If ''Avg Const'' value is 10, new value must be present for 1 second to register the change to a new value. Internal sampling is done every 40 ms, so 25 samples are taken per second. To configure 5 seconds of averaging multiply 10 by 5 yielding 50 as ''Avg Const'' value. The same logic works if the device is in [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep mode]].<br />Averaging follows RC exponential curve, see image below:
[[Image:Fmb120_avg_const.png|300px|none]]
For Boolean values of 5τ, values is used, that means value change is taken when new values is averaged to more than 99.3%.
==Send SMS To==
Sends SMS notification about event to selected number from [[{{{model|FMB1YX}}}_SMS/Call_settings|SMS/Call Settings]] '''GSM Predefined Numbers''' list if event priority is set to [[#Low Priority|Low]], [[#High Priority|High]] or [[#Panic Priority|Panic]].
==SMS Text==
The SMS Text field can be altered and any text can be entered. Maximum message length is '''160''' symbols (numbers, letters and symbols in ASCII, except for comma “,”).
<p>SMS Event Text may be either in default or composed format.</p><p>'''Default format:'''</p><p><code>Date, time, longitude, latitude, 'SMS text', value</code></p><p>Example:</p><p><code>2018/11/02 12:00:00 Lon:0.000000 Lat:0.000000 Alarm 1</code></p>
<p>'''Composed format:'''</p><p>Composed format may consist of text and defined commands which start with '''%''' symbol.</p><p>'''Supported commands:'''</p>
{{{sms_text_fmb|<table class="wikitable">
<tr>
<th style="color:white; background:black">Command</th>
<th style="color:white; background:black">Description</th>
</tr>
<tr>
<th scope="col">imei</th>
<td>IMEI</td>
</tr>
<tr>
<th scope="col">fw</th>
<td>Firmware version</td>
</tr>
<tr>
<th scope="col">fullfw</th>
<td>Full firmware version</td>
</tr>
<tr>
<th scope="col">modem</th>
<td>Modem firmware version</td>
</tr>
<tr>
<th scope="col">gnss</th>
<td>GPS firmware version</td>
</tr>
<tr>
<th scope="col">lat</th>
<td>Latitude (non-float value)</td>
</tr>
<tr>
<th scope="col">lon</th>
<td>Longitude (non-float value)</td>
</tr>
<tr>
<th scope="col">sat</th>
<td>Satellites in use</td>
</tr>
<tr>
<th scope="col">time</th>
<td>Timestamp</td>
</tr>
<tr>
<th scope="col">din1</th>
<td>Digital Input 1</td>
</tr>
<tr>
<th scope="col">din2</th>
<td>Digital Input 2</td>
</tr>
<tr>
<th scope="col">din3</th>
<td>Digital Input 3</td>
</tr>
<tr>
<th scope="col">ain1</th>
<td>Analog Input 1</td>
</tr>
<tr>
<th scope="col">out1</th>
<td>Digital Output 1</td>
</tr>
<tr>
<th scope="col">out2</th>
<td>Digital Output 2</td>
</tr>
<tr>
<th scope="col">pdp</th>
<td>PDOP</td>
</tr>
<tr>
<th scope="col">hdp</th>
<td>HDOP</td>
</tr>
<tr>
<th scope="col">exv</th>
<td>External Voltage</td>
</tr>
<tr>
<th scope="col">gmap</th>
<td>Google Maps link</td>
</tr>
<tr>
<th scope="col">mov</th>
<td>Movement</td>
</tr>
<tr>
<tr>
<th scope="col">odo</th>
<td>Trip Odometer</td>
</tr>
<tr>
<th scope="col">op</th>
<td>GSM operator</td>
</tr>
<tr>
<th scope="col">spd</th>
<td>Speed</td>
</tr>
<tr>
<th scope="col">ib</th>
<td>iButton</td>
</tr>
<tr>
<th scope="col">mod</th>
<td>Data Mode</td>
</tr>
<tr>
<th scope="col">sig</th>
<td>GSM signal</td>
</tr>
<tr>
<th scope="col">slp</th>
<td>Sleep Mode</td>
</tr>
<tr>
<th scope="col">cel</th>
<td>Cell ID</td>
</tr>
<tr>
<th scope="col">lac</th>
<td>Area Code</td>
</tr>
<tr>
<th scope="col">tmp</th>
<td>Dallas Temperature 1</td>
</tr>
<tr>
<th scope="col">mac</th>
<td>BT MAC address</td>
</tr>
<tr>
<th scope="col">flat</th>
<td>Latitude (float value)</td>
</tr>
<tr>
<th scope="col">flon</th>
<td>Longitude (float value)</td>
</tr>
<tr>
<th scope="col">date</th>
<td>Date in yyyy/mm/dd format</td>
</tr>
<tr>
<th scope="col">datetime</th>
<td>Time in hh:mm:ss format</td>
</tr>
<tr>
<th scope="col">val</th>
<td>Eventual IO value</td>
</tr>
<tr>
<th scope="col">io'par_id'</th>
<td>Element value by parameter ID</td>
</tr>
</table>}}}
{{{sms_text_tmt|<table class="wikitable">
<tr>
<th style="color:white; background:black">Command</th>
<th style="color:white; background:black">Description</th>
</tr>
<tr>
<th scope="col">imei</th>
<td>IMEI</td>
</tr>
<tr>
<th scope="col">fw</th>
<td>Firmware version</td>
</tr>
<tr>
<th scope="col">fullfw</th>
<td>Full firmware version</td>
</tr>
<tr>
<th scope="col">modem</th>
<td>Modem firmware version</td>
</tr>
<tr>
<th scope="col">gnss</th>
<td>GPS firmware version</td>
</tr>
<tr>
<th scope="col">lat</th>
<td>Latitude (non-float value)</td>
</tr>
<tr>
<th scope="col">lon</th>
<td>Longitude (non-float value)</td>
</tr>
<tr>
<th scope="col">sat</th>
<td>Satellites in use</td>
</tr>
<tr>
<th scope="col">time</th>
<td>Timestamp</td>
</tr>
<tr>
<th scope="col">pdp</th>
<td>PDOP</td>
</tr>
<tr>
<th scope="col">hdp</th>
<td>HDOP</td>
</tr>
<tr>
<th scope="col">mov</th>
<td>Movement</td>
</tr>
<tr>
<th scope="col">op</th>
<td>GSM operator</td>
</tr>
<tr>
<th scope="col">spd</th>
<td>Speed</td>
</tr>
<tr>
<th scope="col">sig</th>
<td>GSM signal</td>
</tr>
<tr>
<th scope="col">slp</th>
<td>Sleep Mode</td>
</tr>
<tr>
<th scope="col">cel</th>
<td>Cell ID</td>
</tr>
<tr>
<th scope="col">lac</th>
<td>Area Code</td>
</tr>
<tr>
<th scope="col">datetime</th>
<td>time in hh:mm:ss format</td>
</tr>
<tr>
<th scope="col">val</th>
<td>Eventual IO value</td>
</tr>
<tr>
<th scope="col">io'par_id'</th>
<td>Element value by parameter ID</td>
</tr>
<tr>
<th scope="col">gmap</th>
<td>Google Maps link</td>
</tr>
</table>}}}
<p>'''Composed text example:'''</p><p><code>%imei Movement %io50010</code></p><p>'''Event SMS text:'''</p><p><code>352094082828606 Movement 1</code></p>
{|
|-
When no I/O element is enabled, AVL packet comes with GNSS information only. After enabling I/O element(s) AVL packet contains current value(s) of enabled I/O element(s) along with GNSS information.
==Input Name==
I/O element name.
==Current Value==
If device is connected to '''Configurator''' all current I/O values are displayed in this column. Also I/O current values can be seen in [[{{{model|FMB1YX}}}_Status_info#I.2FO_Info|Status→I/O Info]] tab.
==Units==
Units of measurement.
==Priority==
This field allows to enable I/O elements and setting them a priority so they are added to the data packet, which is sent to the server. By default '''{{{txt_count|7}}} I/O elements''' with '''Low priority''' are enabled: <code> {{{txt_elems|}}} GSM Signal, GNSS Status, GNSS PDOP, GNSS HDOP, Speed, Battery Voltage, Active GSM Operator {{{txt_elems|}}}</code>. All records made by {{{model|FMB1YX}}} are regular, and regular packets are sent as low priority records.<p>Priority level (AVL packet priority) can be:</p>
===None Priority===
Module doesn't make additional record.
===Low Priority===
Module makes an additional record with an indication that the '''event was caused by an I/O element change''' (depending onas [[#Operands|Operands]] configuration).
==High and Low Level==
These levels define I/O value range. If I/O value '''enters or exits''' this range, {{{model|FMB1YX}}} '''generates an event'''.
==Event Only==
When this is selected, I/O element status value will be '''appended only to eventual records''', otherwise I/O element status value will appear in each AVL record.
==Operands==
Defines when to generate event: [[#Operand On Exit|On Exit]], [[#Operand On Entrance|On Entrance]], [[#Operand On Both|On Both]], [[#Operand Monitoring|Monitoring]], [[#Operand On Hysteresis|On Hysteresis]], [[#Operand On Change|On Change]] or [[#Operand On Delta Change|On Delta Change]].
===Operand On Exit===
Record is generated when input value leaves a range between low and high level limits.
[[Image:Fmb120_on_exit.png|x150px|none]]
===Operand On Entrance===
----
Record is generated when input value enters a range between low and high level limits.
[[Image:Fmb120_on_entrance.png|x150px|none]]
===Operand On Both===
----
Record is generated by both ''On Exit'' and ''On Entrance'' operands' logic at same time.
[[Image:Fmb120_on_both.png|x150px|none]]
===Operand Monitoring===
----
No event at all. Values are recorded only when other triggers worked.
[[Image:Fmb120_operand_monitoring.png|x150px|none]]
===Operand On Hysteresis===
----
Record is generated when input value crosses the high limit value from below the low limit value or vice versa.
[[Image:Fmb120_on_hysteresis.png|350px|none]]
===Operand On Change===
----
Record is generated when input value changes.
[[Image:Fmb120_on_change.png|x150px|none]]
===Operand On Delta Change===
----
Record is generated when input value changes and the absolute change becomes equal to or higher than the limit value.
[[Image:Fmb120_on_delta_change.png|x150px|none]]
==Avg Const==
If ''Avg Const'' value is 10, new value must be present for 1 second to register the change to a new value. Internal sampling is done every 40 ms, so 25 samples are taken per second. To configure 5 seconds of averaging multiply 10 by 5 yielding 50 as ''Avg Const'' value. The same logic works if the device is in [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep mode]].<br />Averaging follows RC exponential curve, see image below:
[[Image:Fmb120_avg_const.png|300px|none]]
For Boolean values of 5τ, values is used, that means value change is taken when new values is averaged to more than 99.3%.
==Send SMS To==
Sends SMS notification about event to selected number from [[{{{model|FMB1YX}}}_SMS/Call_settings|SMS/Call Settings]] '''GSM Predefined Numbers''' list if event priority is set to [[#Low Priority|Low]], [[#High Priority|High]] or [[#Panic Priority|Panic]].
==SMS Text==
The SMS Text field can be altered and any text can be entered. Maximum message length is '''160''' symbols (numbers, letters and symbols in ASCII, except for comma “,”).
<p>SMS Event Text may be either in default or composed format.</p><p>'''Default format:'''</p><p><code>Date, time, longitude, latitude, 'SMS text', value</code></p><p>Example:</p><p><code>2018/11/02 12:00:00 Lon:0.000000 Lat:0.000000 Alarm 1</code></p>
<p>'''Composed format:'''</p><p>Composed format may consist of text and defined commands which start with '''%''' symbol.</p><p>'''Supported commands:'''</p>
{{{sms_text_fmb|<table class="wikitable">
<tr>
<th style="color:white; background:black">Command</th>
<th style="color:white; background:black">Description</th>
</tr>
<tr>
<th scope="col">imei</th>
<td>IMEI</td>
</tr>
<tr>
<th scope="col">fw</th>
<td>Firmware version</td>
</tr>
<tr>
<th scope="col">fullfw</th>
<td>Full firmware version</td>
</tr>
<tr>
<th scope="col">modem</th>
<td>Modem firmware version</td>
</tr>
<tr>
<th scope="col">gnss</th>
<td>GPS firmware version</td>
</tr>
<tr>
<th scope="col">lat</th>
<td>Latitude (non-float value)</td>
</tr>
<tr>
<th scope="col">lon</th>
<td>Longitude (non-float value)</td>
</tr>
<tr>
<th scope="col">sat</th>
<td>Satellites in use</td>
</tr>
<tr>
<th scope="col">time</th>
<td>Timestamp</td>
</tr>
<tr>
<th scope="col">din1</th>
<td>Digital Input 1</td>
</tr>
<tr>
<th scope="col">din2</th>
<td>Digital Input 2</td>
</tr>
<tr>
<th scope="col">din3</th>
<td>Digital Input 3</td>
</tr>
<tr>
<th scope="col">ain1</th>
<td>Analog Input 1</td>
</tr>
<tr>
<th scope="col">out1</th>
<td>Digital Output 1</td>
</tr>
<tr>
<th scope="col">out2</th>
<td>Digital Output 2</td>
</tr>
<tr>
<th scope="col">pdp</th>
<td>PDOP</td>
</tr>
<tr>
<th scope="col">hdp</th>
<td>HDOP</td>
</tr>
<tr>
<th scope="col">exv</th>
<td>External Voltage</td>
</tr>
<tr>
<th scope="col">gmap</th>
<td>Google Maps link</td>
</tr>
<tr>
<th scope="col">mov</th>
<td>Movement</td>
</tr>
<tr>
<tr>
<th scope="col">odo</th>
<td>Trip Odometer</td>
</tr>
<tr>
<th scope="col">op</th>
<td>GSM operator</td>
</tr>
<tr>
<th scope="col">spd</th>
<td>Speed</td>
</tr>
<tr>
<th scope="col">ib</th>
<td>iButton</td>
</tr>
<tr>
<th scope="col">mod</th>
<td>Data Mode</td>
</tr>
<tr>
<th scope="col">sig</th>
<td>GSM signal</td>
</tr>
<tr>
<th scope="col">slp</th>
<td>Sleep Mode</td>
</tr>
<tr>
<th scope="col">cel</th>
<td>Cell ID</td>
</tr>
<tr>
<th scope="col">lac</th>
<td>Area Code</td>
</tr>
<tr>
<th scope="col">tmp</th>
<td>Dallas Temperature 1</td>
</tr>
<tr>
<th scope="col">mac</th>
<td>BT MAC address</td>
</tr>
<tr>
<th scope="col">flat</th>
<td>Latitude (float value)</td>
</tr>
<tr>
<th scope="col">flon</th>
<td>Longitude (float value)</td>
</tr>
<tr>
<th scope="col">date</th>
<td>Date in yyyy/mm/dd format</td>
</tr>
<tr>
<th scope="col">datetime</th>
<td>Time in hh:mm:ss format</td>
</tr>
<tr>
<th scope="col">val</th>
<td>Eventual IO value</td>
</tr>
<tr>
<th scope="col">io'par_id'</th>
<td>Element value by parameter ID</td>
</tr>
</table>}}}
{{{sms_text_tmt|<table class="wikitable">
<tr>
<th style="color:white; background:black">Command</th>
<th style="color:white; background:black">Description</th>
</tr>
<tr>
<th scope="col">imei</th>
<td>IMEI</td>
</tr>
<tr>
<th scope="col">fw</th>
<td>Firmware version</td>
</tr>
<tr>
<th scope="col">fullfw</th>
<td>Full firmware version</td>
</tr>
<tr>
<th scope="col">modem</th>
<td>Modem firmware version</td>
</tr>
<tr>
<th scope="col">gnss</th>
<td>GPS firmware version</td>
</tr>
<tr>
<th scope="col">lat</th>
<td>Latitude (non-float value)</td>
</tr>
<tr>
<th scope="col">lon</th>
<td>Longitude (non-float value)</td>
</tr>
<tr>
<th scope="col">sat</th>
<td>Satellites in use</td>
</tr>
<tr>
<th scope="col">time</th>
<td>Timestamp</td>
</tr>
<tr>
<th scope="col">pdp</th>
<td>PDOP</td>
</tr>
<tr>
<th scope="col">hdp</th>
<td>HDOP</td>
</tr>
<tr>
<th scope="col">mov</th>
<td>Movement</td>
</tr>
<tr>
<th scope="col">op</th>
<td>GSM operator</td>
</tr>
<tr>
<th scope="col">spd</th>
<td>Speed</td>
</tr>
<tr>
<th scope="col">sig</th>
<td>GSM signal</td>
</tr>
<tr>
<th scope="col">slp</th>
<td>Sleep Mode</td>
</tr>
<tr>
<th scope="col">cel</th>
<td>Cell ID</td>
</tr>
<tr>
<th scope="col">lac</th>
<td>Area Code</td>
</tr>
<tr>
<th scope="col">datetime</th>
<td>time in hh:mm:ss format</td>
</tr>
<tr>
<th scope="col">val</th>
<td>Eventual IO value</td>
</tr>
<tr>
<th scope="col">io'par_id'</th>
<td>Element value by parameter ID</td>
</tr>
<tr>
<th scope="col">gmap</th>
<td>Google Maps link</td>
</tr>
</table>}}}
<p>'''Composed text example:'''</p><p><code>%imei Movement %io50010</code></p><p>'''Event SMS text:'''</p><p><code>352094082828606 Movement 1</code></p>
{|
|-