Wiki Knowledge Base | Teltonika GPS

Changes

Iridium Edge Communication Protocol (view source)

Revision as of 12:45, 25 April 2023

657 bytes removed ,  12:45, 25 April 2023
→‎SDB record structure
Line 193: Line 193:  
This byte is divided in two parts of four bits, as shown in table below:
 
This byte is divided in two parts of four bits, as shown in table below:
   −
{| class="nd-othertables_2" style="width:100%;"
  −
|-
  −
! colspan="4" style="font-weight:bold;" | <br />Flags  (not used yet)
  −
! colspan="4" style="font-weight:bold;" | <br />SBD  AVL ID
  −
|- style="color:#fe0000;"
  −
| <br />Bit 7
  −
| <br />Bit 6
  −
| <br />Bit 5
  −
| <br />Bit 4
  −
| style="color:#3531ff;" | <br />Bit 3
  −
| style="color:#3531ff;" | <br />Bit 2
  −
| style="color:#3531ff;" | <br />Bit 1
  −
| style="color:#3531ff;" | <br />Bit 0
  −
|}
  −
<br></br>
   
SBD AVL ID is used to show which IO element generated the Panic element. The list of currently implemented possible values is described below:
 
SBD AVL ID is used to show which IO element generated the Panic element. The list of currently implemented possible values is described below:
 
<br></br>
 
<br></br>
Line 230: Line 215:  
Data from Bit 7 to Bit 4 are not used at the moment. The server should ignore this data part.
 
Data from Bit 7 to Bit 4 are not used at the moment. The server should ignore this data part.
 
<br></br>
 
<br></br>
−
'''''DIN/DOUT info''''' - Displays configured IO elements values of enabled IO elements in SBD IO source settings - (parameter ID 99422).  Since digital inputs can contain only logic 1 or 0 they are bit masked in one byte.
      
==SBD packet example==
 
==SBD packet example==
Retrieved from "https://wiki.teltonika-gps.com/view/Special:MobileDiff/85064"