5,131
edits
Changes
mLine 22:
Line 22: − + − + − +
Text replacement - "Bluetooth(?!®)" to "Bluetooth®"
1. Turn on your device by holding the power button for around 7 seconds.
1. Turn on your device by holding the power button for around 7 seconds.
2. Connect device to computer using '''Micro-USB cable''' or '''Bluetooth''' connection:
2. Connect device to computer using '''Micro-USB cable''' or '''Bluetooth®''' connection:
* Using '''Micro-USB''' cable
* Using '''Micro-USB''' cable
– You will need to install USB drivers, see “How to install USB drivers (Windows)” shown below.
– You will need to install USB drivers, see “How to install USB drivers (Windows)” shown below.
* Using '''Bluetooth'''
* Using '''Bluetooth®'''
– GH5200 Bluetooth is enabled by default. Turn on '''Bluetooth''' on your PC, then select '''Add Bluetooth or other device > Bluetooth'''. Choose your device named – '''“GH5200_last_7_imei_digits”''', without '''LE''' in the end. Enter default password 5555, press Connect and then select '''Done'''.
– GH5200 Bluetooth® is enabled by default. Turn on '''Bluetooth®''' on your PC, then select '''Add Bluetooth® or other device > Bluetooth®'''. Choose your device named – '''“GH5200_last_7_imei_digits”''', without '''LE''' in the end. Enter default password 5555, press Connect and then select '''Done'''.
3. You are now ready to use the device on your computer.
3. You are now ready to use the device on your computer.