193
edits
Changes
no edit summary
[[File:5 easy steps to prepare any Teltonika Telematics device banner.png]]
[[File:5 easy steps to prepare any Teltonika Telematics device banner.png]]
In this chapter, we will go through 5 easy testing steps which will help you get acquainted with Teltonika Telematics devices. We will cover everything you need to start using the device - from inserting a SIM card, powering the device, and ending with GPS track information directly from your vehicle to the server.
In this chapter, we will go through 5 easy testing steps which will help you get acquainted with Teltonika Telematics devices. We will cover everything you need to start using the device - from inserting a SIM card, powering the device, and ending with GPS track information directly from your vehicle to the server.
<youtube width="850" height="480">GDGFG6Lh1B0</youtube><br><br>
==='''STEP 1: Prepare the Device'''===
==='''STEP 1: Prepare the Device'''===
'''How to insert SIM card and connect the battery?'''
'''How to insert SIM card and connect the battery?'''
# Gently remove '''device cover''' using '''plastic pry tool''' from both sides as it is showed in a 1st picture.
#Gently remove '''device cover''' using '''plastic pry tool''' from both sides as it is showed in a 1st picture.
# After opening device cover, you will see '''SIM card''' and '''battery''' connection '''slots'''.
#After opening device cover, you will see '''SIM card''' and '''battery''' connection '''slots'''.
# Insert '''SIM''' card as shown with '''PIN request disabled''' or read '''[[FMB120 Security info|Security info]]''' (Universal Guide) how to enter it later in Configurator. Make sure that SIM card '''cut-off corner''' is pointing forward to slot.
#Insert '''SIM''' card as shown with '''PIN request disabled''' or read '''[[FMB120 Security info|Security info]]''' (Universal Guide) how to enter it later in Configurator. Make sure that SIM card '''cut-off corner''' is pointing forward to slot.
# Connect the battery as shown on device. Position the battery in place where it does not obstruct other components.
#Connect the battery as shown on device. Position the battery in place where it does not obstruct other components.
# Attach device '''cover''' back. Device is ready to be connected.
#Attach device '''cover''' back. Device is ready to be connected.
*GNSS Status describes whether the module is ON, received/sent GNSS packets count, FIX status and FIX time
*GNSS Status describes whether the module is ON, received/sent GNSS packets count, FIX status and FIX time
* Satellites provide you information about visible and currently in-use satellites
*Satellites provide you information about visible and currently in-use satellites
*Location provides you the coordinates, speed, altitude, and angle of your current location.
*Location provides you the coordinates, speed, altitude, and angle of your current location.
|-
|-
| rowspan="3" |[[File:GSM Info.png|frameless|801x801px]]
| rowspan="3" |[[File:GSM Info.png|frameless|801x801px]]
| Signal Level - make sure that the signal is available in order to send the data to the server.
|Signal Level - make sure that the signal is available in order to send the data to the server.
|-
|-
|Type - AVL Data sending status.
|Type - AVL Data sending status.
#Open [[Opening TCP/UDP port|'''TCP/UDP port''']]
#Open [[Opening TCP/UDP port|'''TCP/UDP port''']]
# Go to [[Java Parser First Start Guide|'''Java Parser First Start Guide''']]
#Go to [[Java Parser First Start Guide|'''Java Parser First Start Guide''']]
Below you can find pictures of how the track looks on different pre-made tracking platforms:
Below you can find pictures of how the track looks on different pre-made tracking platforms: