2,287
edits
Changes
OBD II TO FMS ADAPTER AND J1939 SUPPORT IN FMx003 (view source)
Revision as of 12:26, 30 May 2024
, 30 May→Device Configuration
==Device Configuration==
==Device Configuration==
1. Connect your FMB003, FMM003 or FMC003 device to PC via USB or Bluetooth.
1. Connect your FMB003, FMM003 or FMC003 device to PC via USB or Bluetooth.<br>
2. Open Teltonika.Configurator_1.7.53_E.ELD_R.8 and find your device in the list.
2. Open Teltonika.Configurator_1.7.53_E.ELD_R.8 and find your device in the list.<br>
3. Select your device from the list.
3. Select your device from the list.<br>
4. Enable Codec 8 Extended protocol.
4. Enable Codec 8 Extended protocol.<br>
5. Open „OBD II“ section on the left.
5. Open „OBD II“ section on the left.<br>
6. In „General“ -> „OBD II Settings“ -> „OBD Feature“ select „ELD“.
6. In „General“ -> „OBD II Settings“ -> „OBD Feature“ select „ELD“.<br>
7. In „OBD VIN settings“ -> „VIN Source“ select prefered source. Some heavy duty vehicles may not automaticly provide VIN number, in that case we recommend to setup VIN manually.<br>
7. In „OBD VIN settings“ -> „VIN Source“ select prefered source. Some heavy duty vehicles may not automaticly provide VIN number, in that case we recommend to setup VIN manually.<br>
<br>
<br>