Line 1: |
Line 1: |
| [[File:Alert.png|left|20px|link=]] {{{model|FMB640}}} supports CAN adapters over RS232 connection. '''CAN adapter support is added from {{{firmware|02.02.11.Rev.00}}} firmware''' <br> Easy steps to install and configure following CAN adapters on {{{model|FMB640}}} device: | | [[File:Alert.png|left|20px|link=]] {{{model|FMB640}}} supports CAN adapters over RS232 connection. '''CAN adapter support is added from {{{firmware|02.02.11.Rev.00}}} firmware''' <br> Easy steps to install and configure following CAN adapters on {{{model|FMB640}}} device: |
| * [[LV-CAN200]] | | * [[LV-CAN200]] |
| + | * [[ALL-CAN300]] |
| * [[ECAN02]] | | * [[ECAN02]] |
| | | |
Line 6: |
Line 7: |
| | | |
| ==Installing CAN adapter with {{{model|FMB640}}} device== | | ==Installing CAN adapter with {{{model|FMB640}}} device== |
− | ===Installing LV-CAN200=== | + | ===Installing LV-CAN200 / ALL-CAN300=== |
| | | |
− | You can watch [[LV-CAN200]] installation video in our YouTube channel [https://youtu.be/V9RTdSy1E8w '''here'''] or follow connection instructions below. | + | You can watch [[LV-CAN200]] / [[ALL-CAN300]] installation video in our YouTube channel [https://youtu.be/V9RTdSy1E8w '''here'''] or follow connection instructions below. |
| ====Tools needed for installation==== | | ====Tools needed for installation==== |
− | * [[LV-CAN200]] | + | * [[LV-CAN200]] or [[ALL-CAN300]] |
| * Connection scheme (Please contact Teltonika Sales Representative and provide information about '''vehicle manufacturer''', '''model''' and '''year'''. | | * Connection scheme (Please contact Teltonika Sales Representative and provide information about '''vehicle manufacturer''', '''model''' and '''year'''. |
| * {{{model|FMB640}}} device | | * {{{model|FMB640}}} device |
Line 30: |
Line 31: |
| [[File:{{{imageName|FMX65vall.png}}}|1000px|none|thumb|LV-CAN200 connection example. This is not a connection diagram for your vehicle. Every vehicle has a specific scheme.]] | | [[File:{{{imageName|FMX65vall.png}}}|1000px|none|thumb|LV-CAN200 connection example. This is not a connection diagram for your vehicle. Every vehicle has a specific scheme.]] |
| | | |
− | ===Installing LV-CAN200 + ECAN02=== | + | ===Installing LV-CAN200 / ALL-CAN300 + ECAN02=== |
| ====Tools needed for installation==== | | ====Tools needed for installation==== |
− | * [[LV-CAN200]] | + | * [[LV-CAN200]] / [[ALL-CAN300]] |
| * Connection scheme (Please contact Teltonika Sales Representative and provide information about '''vehicle manufacturer''', '''model''' and '''year'''. | | * Connection scheme (Please contact Teltonika Sales Representative and provide information about '''vehicle manufacturer''', '''model''' and '''year'''. |
| * [[ECAN02]] (Used for contactless connection. If '''two CAN lines''' need to be connected, '''ECAN02''' must be used.) | | * [[ECAN02]] (Used for contactless connection. If '''two CAN lines''' need to be connected, '''ECAN02''' must be used.) |
Line 66: |
Line 67: |
| The number of digits required to enter the correct Program No. may vary depending on the Software and manufacture date of your CAN Adapter: | | The number of digits required to enter the correct Program No. may vary depending on the Software and manufacture date of your CAN Adapter: |
| * [[LV-CAN200#Adapter_changes|LV-CAN200 adapter changes]] | | * [[LV-CAN200#Adapter_changes|LV-CAN200 adapter changes]] |
| + | * [[ALL-CAN300#Adapter_changes|ALL-CAN300 adapter changes]] |
| | | |
| ====Entering via SMS command==== | | ====Entering via SMS command==== |
Line 110: |
Line 112: |
| |+ | | |+ |
| |- | | |- |
− | | rowspan="5" style="border: 1px solid #0054A6; background: white; color: #0054A6; text-align: center; width:10%;" | For LV-CAN200<br/>3 digit | + | | rowspan="5" style="border: 1px solid #0054A6; background: white; color: #0054A6; text-align: center; width:10%;" |For<br />[[ALL-CAN300]]<br />[[LV-CAN200]]<br />3 digit |
− | | rowspan="6" style="border: 1px solid #0054A6; background: white; color: #0054A6; text-align: center; width:10%;" | For LV-CAN200<br/>4 digit | + | | rowspan="6" style="border: 1px solid #0054A6; background: white; color: #0054A6; text-align: center; width:10%;" |For<br />[[ALL-CAN300]]<br />[[LV-CAN200]]<br />4 digit |
− | | rowspan="7" style="border: 1px solid #0054A6; background: white; color: #0054A6; text-align: center; width:11%;" | For<br/>LV-CAN200<br/>>5 digit | + | | rowspan="7" style="border: 1px solid #0054A6; background: white; color: #0054A6; text-align: center; width:11%;" |For<br />[[ALL-CAN300]]<br />[[LV-CAN200]]<br />5 digit |
| | style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white; width:38%;" |1. Hold SWITCH down until LED stars blink. | | | style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white; width:38%;" |1. Hold SWITCH down until LED stars blink. |
| |- | | |- |
Line 563: |
Line 565: |
| Due to the growing number of supported cars, program numbers have exceeded "999". In order to maintain one number format, we are moving from 3-digit to 4-digit program numbers.<br/>In new LV-CAN200 firmware (from 2017-09-01) all program numbers that were up to 999 are changed to start from 1000. So that further program numbers would continue the counting with 4-digit numbers.<br/>However, all existing program numbers stay the same, but "1" is added to the front. If the device still understands the entered 3-digit program number (via SMS/GPRS), it will automatically add "1" before it. If you enter "247" - the device number will turn into "1247". In Bootloader only a 4-digit format is available, just add "1" to the front of the needed program number. | | Due to the growing number of supported cars, program numbers have exceeded "999". In order to maintain one number format, we are moving from 3-digit to 4-digit program numbers.<br/>In new LV-CAN200 firmware (from 2017-09-01) all program numbers that were up to 999 are changed to start from 1000. So that further program numbers would continue the counting with 4-digit numbers.<br/>However, all existing program numbers stay the same, but "1" is added to the front. If the device still understands the entered 3-digit program number (via SMS/GPRS), it will automatically add "1" before it. If you enter "247" - the device number will turn into "1247". In Bootloader only a 4-digit format is available, just add "1" to the front of the needed program number. |
| --> | | --> |
| + | |
| + | ==CAN Adapter State Flags== |
| + | |
| + | CAN Adapters receive data about the states of various systems within the vehicle, and send them as flags to {{{model|FMx640}}}. {{{model|FMx640}}} device stores these flags in hexadecimal format, as one variable. '''Note!''' To retrieve all flags, Firmware version '''03.00.16.Rev.01''' for '''FMx650 / FMx641''' or newer must be used. Below are the table of flags that are kept by [[LV-CAN200|LV-CAN200]], [[ALL-CAN300|ALL-CAN300]] and information how to retrieve them:<br /> |
| + | |
| + | ===Security State Flags P4=== |
| + | {| class="nd-othertables_2" style="text-align:center; border: 2px solid;border-collapse: collapse; border-bottom: 2pt solid black;" |
| + | |- |
| + | ! style="column-width: 30px;text-align:center;"| Byte |
| + | ! style="column-width: 30px;text-align:center;"|Bit |
| + | ! style="text-align:center;"|Value bitmasks |
| + | ! style="column-width: 75px;text-align:center;"|LVCAN |
| + | ! style="column-width: 75px;text-align:center;"|ALLCAN |
| + | |
| + | |- |
| + | | style="color:#f56b00;" | 0 |
| + | | style="color:#f56b00;" | 0 |
| + | | 0x00 – CAN1 connected, currently no data is received<br />0x01 – CAN1 connected, currently data is received<br />0x02 – CAN1 not connected, needs connection<br />0x03 – CAN1 not connected does not need connection |
| + | | ✔ |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#f56b00;" | 0 |
| + | | style="color:#f56b00;" | 2 |
| + | | 0x00 – CAN2 connected, currently no data is received<br />0x01 – CAN2 connected, currently data is received<br />0x02 – CAN2 not connected, needs connection<br />0x03 – CAN2 not connected does not need connection |
| + | | ✔ |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#f56b00;" | 0 |
| + | | style="color:#f56b00;" | 4 |
| + | | 0x00 – CAN3 connected, currently no data is received<br />0x01 – CAN3 connected, currently data is received<br />0x02 – CAN3 not connected, needs connection<br />0x03 – CAN3 not connected does not need connection |
| + | | |
| + | | |
| + | |
| + | |- |
| + | | style="color:#3531ff;" | 1 |
| + | | style="color:#3531ff;" | 8 |
| + | | 0x01 – ignition on |
| + | | ✔ |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#3531ff;" | 1 |
| + | | style="color:#3531ff;" | 9 |
| + | | 0x02 – key in ignition lock |
| + | | |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#3531ff;" | 1 |
| + | | style="color:#3531ff;" | 10 |
| + | | 0x04 – Webasto |
| + | | |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#3531ff;" | 1 |
| + | | style="color:#3531ff;" | 11 |
| + | | 0x08 – engine is working |
| + | | |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#3531ff;" | 1 |
| + | | style="color:#3531ff;" | 12 |
| + | | 0x10 – standalone engine |
| + | | |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#3531ff;" | 1 |
| + | | style="color:#3531ff;" | 13 |
| + | | 0x20 – ready to drive |
| + | | |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#3531ff;" | 1 |
| + | | style="color:#3531ff;" | 14 |
| + | | 0x40 – engine is working on CNG |
| + | | ✔ |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#3531ff;" | 1 |
| + | | style="color:#3531ff;" | 15 |
| + | | 0x80 – work mode (0 – private, 1 – company) |
| + | | |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#009901;" | 2 |
| + | | style="color:#009901;" | 16 |
| + | | 0x01 – operator is present |
| + | | |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#009901;" | 2 |
| + | | style="color:#009901;" | 17 |
| + | | 0x02 – interlock active |
| + | | |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#009901;" | 2 |
| + | | style="color:#009901;" | 18 |
| + | | 0x04 – handbrake is active |
| + | | |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#009901;" | 2 |
| + | | style="color:#009901;" | 19 |
| + | | 0x08 – footbrake is active |
| + | | |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#009901;" | 2 |
| + | | style="color:#009901;" | 20 |
| + | | 0x10 – clutch is pushed |
| + | | |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#009901;" | 2 |
| + | | style="color:#009901;" | 21 |
| + | | 0x20 – status of the hazard warning lights switch active |
| + | | |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#009901;" | 2 |
| + | | style="color:#009901;" | 22 |
| + | | 0x40 – front left door opened |
| + | | ✔ |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#009901;" | 2 |
| + | | style="color:#009901;" | 23 |
| + | | 0x80 – front right door opened |
| + | | ✔ |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#d13c00;" | 3 |
| + | | style="color:#d13c00;" | 24 |
| + | | 0x01 – rear left door opened |
| + | | ✔ |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#d13c00;" | 3 |
| + | | style="color:#d13c00;" | 25 |
| + | | 0x02 – rear right door opened |
| + | | ✔ |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#d13c00;" | 3 |
| + | | style="color:#d13c00;" | 26 |
| + | | 0x04 – trunk door opened |
| + | | ✔ |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#d13c00;" | 3 |
| + | | style="color:#d13c00;" | 27 |
| + | | 0x08 – engine cover opened |
| + | | ✔ |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#d13c00;" | 3 |
| + | | style="color:#d13c00;" | 28 |
| + | | 0x10 – charging wire is plugged |
| + | | |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#d13c00;" | 3 |
| + | | style="color:#d13c00;" | 29 |
| + | | 0x20 – battery charging on |
| + | | |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#d13c00;" | 3 |
| + | | style="color:#d13c00;" | 30 |
| + | | 0x40 – electric engine is working |
| + | | |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#d13c00;" | 3 |
| + | | style="color:#d13c00;" | 31 |
| + | | 0x80 – car is closed with factory remote control |
| + | | |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#ff00db;" | 4 |
| + | | style="color:#ff00db;" | 32 |
| + | | 0x01 – car is closed |
| + | | |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#ff00db;" | 4 |
| + | | style="color:#ff00db;" | 33 |
| + | | 0x02 – factory installed alarm is active |
| + | | |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#ff00db;" | 4 |
| + | | style="color:#ff00db;" | 34 |
| + | | 0x04 – emulated alarm is active |
| + | | |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#ff00db;" | 4 |
| + | | style="color:#ff00db;" | 35 |
| + | | 0x08 – signal of closing with factory remote control was sent |
| + | | |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#ff00db;" | 4 |
| + | | style="color:#ff00db;" | 36 |
| + | | 0x10 – signal of opening with factory remote control was sent |
| + | | |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#ff00db;" | 4 |
| + | | style="color:#ff00db;" | 37 |
| + | | 0x20 – rearm signal was sent |
| + | | |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#ff00db;" | 4 |
| + | | style="color:#ff00db;" | 38 |
| + | | 0x40 – trunk was opened with remote control |
| + | | |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#ff00db;" | 4 |
| + | | style="color:#ff00db;" | 39 |
| + | | 0x80 – CAN module is in SLEEP mode |
| + | | ✔ |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#340096;" | 5 |
| + | | style="color:#340096;" | 40 |
| + | | 0x01 – signal of closing with factory remote control was sent 3 times |
| + | | |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#340096;" | 5 |
| + | | style="color:#340096;" | 41 |
| + | | 0x02 – parking is active |
| + | | |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#340096;" | 5 |
| + | | style="color:#340096;" | 42 |
| + | | 0x04 – reverse is active |
| + | | |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#340096;" | 5 |
| + | | style="color:#340096;" | 43 |
| + | | 0x08 – neutral is active |
| + | | |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#340096;" | 5 |
| + | | style="color:#340096;" | 44 |
| + | | 0x10 – drive is active |
| + | | |
| + | | ✔ |
| + | |
| + | |- |
| + | | style="color:#340096;" | 5 |
| + | | style="color:#340096;" | 45 |
| + | | 0x20 – engine lock active |
| + | | |
| + | | |
| + | |
| + | |- |
| + | | style="color:#340096;" | 5 |
| + | | style="color:#340096;" | 46 |
| + | | 0x40 – request to lock the engine (activation after attempt to restart the engine) |
| + | | |
| + | | |
| + | |
| + | |- |
| + | | style="color:#340096;" | 5 |
| + | | style="color:#340096;" | 47 |
| + | | 0x80 – factory armed |
| + | | |
| + | | |
| + | |
| + | |- |
| + | | style="color:#fe0000;" | 6 |
| + | | style="color:#fe0000;" | 48 |
| + | | 0x01 - roof opened |
| + | | ✔ |
| + | | ✔ |
| + | |
| + | |} |
| + | <br> |
| | | |
| | | |
| [[Category:FMB641 Manual]] | | [[Category:FMB641 Manual]] |