137
edits
Changes
Template:FTX8XX/9XX Device Status (view source)
Revision as of 05:49, 25 June 2024
, Tuesday at 05:49no edit summary
<br>
<br>
==SIM Security==
==Cellular information==
[[File:Cellular Information.png|right|500px]]
'''Modem version''' - The modem version of the GSM module
'''Modem status''' - Displays the status of the modem (ON/OFF/Sleep)
'''Network status''' - Displays the GPRS status of the device
''' Current operator code''' - Specified current SIM-card operator code.
'''Signal Level''' - Specifies the current signal strength of the connected network.
<br>
<br>
<br>
<br>
<br>
<br>
<br>
==SIM Security==
[[File:Cellular Information.png|right|500px]]
*The state and status of the currently connected SIM card can be observed here. If a SIM card with a PIN code is used, the user can enter it in this section. The remaining attempts to enter the PIN code are shown as well.
*The state and status of the currently connected SIM card can be observed here. If a SIM card with a PIN code is used, the user can enter it in this section. The remaining attempts to enter the PIN code are shown as well.
==Maintenance==
==Maintenance==
[[File:Cellular Information.png|right|500px]]
'''Dump''' - after the button is pressed, the device starts downloading .dmp logs and configuration .cfg from the device in a compressed archive. <p>Archive name: <code>YYYY_MM_DD_HH_MM_SS_{{{model|FMB1YX}}}_IMEI_Dump.zip</code><br>Default directory: <code>C:\Users\<username>\Documents</code><br>Dump files can be read only with special software. If needed, provide these files for analysis to your Teltonika sales manager or Teltonika Support team.</p>
'''Open file''' - this new tab opens at the bottom of the page after downloading the Dump.
[[Category:{{{model|}}} Configuration]]
[[Category:{{{model|}}} Configuration]]