558
edits
Changes
no edit summary
<b>On Stop scenario</b><br>
<b>On Stop scenario</b><br>
<b>On Stop periodic tracking</b> - enable or disable periodic data sending when device is On Stop. Device will generate and send normal record with event ID 0 and movement AVL ID 240 with a value of 0.<br>
<b>On Stop periodic tracking</b> - enable or disable periodic data sending when device is On Stop. Device will generate and send normal record with event ID 0 and movement AVL ID 240 with a value of 0.<br>
<b>On Stop event record</b> - enable or disable record sending when device switches tracking scenario from On Move to On Stop. To trigger this event <b>On Stop detection time</b> (see Record timestamp shift) timer needs to reach set value. Once event is triggered GNSS module will wake up and obtain GNSS fix. Record will have AVL event 240 with a value of 4 that means "Movement event - On Stop".<br>
<b>On Stop event record</b> - enable or disable record sending when device switches tracking scenario from On Move to On Stop. To trigger this event <b>On Stop detection time</b> timer needs to reach set value. Once event is triggered GNSS module will wake up and obtain GNSS fix. Record will have AVL event 240 with a value of 0 that means "Movement event - On Stop".<br>
<b>On Stop</b> time period between records when device is working in On Stop scenario.<br>
<b>On Stop</b> time period between records when device is working in On Stop scenario.<br>
<br>
<br>
<b>On Move scenario</b><br>
<b>On Move scenario</b><br>
<b>On Move periodic tracking</b> enable or disable periodic data sending when device is On Move. Device will generate and send normal record with event ID 0 and movement AVL ID 240 with a value of 1.<br>
<b>On Move periodic tracking</b> enable or disable periodic data sending when device is On Move. Device will generate and send normal record with event ID 0 and movement AVL ID 240 with a value of 1.<br>
<b>On Move event record</b> enable or disable record sending when device switches tracking scenario from On Stop to On Move. To trigger this event <b>On Move detection time</b> (see Record timestamp shift) timer needs to reach set value. Once event is triggered device will wake up and will trigger one of two records:<br>
<b>On Move event record</b> enable or disable record sending when device switches tracking scenario from On Stop to On Move. To trigger this event <b>On Move detection time</b> timer needs to reach set value. Once event is triggered device will wake up and will trigger one of two records:<br>
1 - if last record did not have a GNSS fix, GNSS module will be turned on and fix obtained.<br>
1 - if last record did not have a GNSS fix, GNSS module will be turned on and fix obtained.<br>
2 - if last record had a valid GNSS fix, GNSS module will not be turned on and record will contain last good coordinates.<br>
2 - if last record had a valid GNSS fix, GNSS module will not be turned on and record will contain last good coordinates.<br>
Record will have AVL event 240 with a value of 5 that means "Movement event - On Move" in both cases.<br>
Record will have AVL event 240 with a value of 1 that means "Movement event - On Move" in both cases.<br>
<b>On Moving (s)</b> time period between records when device is working in On Move scenario.<br>
<b>On Moving (s)</b> time period between records when device is working in On Move scenario.<br>