Wiki Knowledge Base | Teltonika GPS

Template:FMB2 temporary

It is strongly recommended to mount FMB2YX outside of the vehicle with the sticker direction to the sky.
Trucks.png

Most commercial trucks have plastic hood in front of the vehicle. It is recommended to mount FMB2YX under the hood. Power cord output of the device should be at the bottom. If it is not possible, if a front hood is made of some kind of metal, the device can be mounted inside the car on the front panel as close as possible to the front window.
Truck Inside.png It is strongly recommended to mount FMB2YX outside of the vehicle with the sticker direction to the sky.
Tractors.png

Most light vehicles has oblique front window that opens most part of interior front panel. FMB2YX can be mounted under the plastic panel behind the front window, with the sticker direction to a window (sky).
Light Vehicles.png Best FMB2YX mounting position is outside of vehicle with any metal above the device. Recommended deviation from horizontal axis of vehicle max 3-5°.
Mounting positions.png

Mounting position and recommended deviation from longitudinal axis of vehicle ±2°.
Mounting positions v2.png FMB2YX device can not be mounted inside in the vehicle door!
Inside door.png

FMB2YX device cannot be mounted inside the vehicle!
Inside vehicles.png

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:FMB2_temporary&oldid=13503"