Template:MTB100 First start card
Small and smart tracker with Blue-tooth
How to insert Micro-SIM card, connect power supply cable and internal back-up battery
- Gently remove MTB100 cover using plastic pry tool from both sides.
- Separate PCB from plastic cover and connect power supply cable.
- Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
- Connect internal back-up battery.
- Attach device cover back. (Do not forget to configure the device before reassembling the device!)
- Device ready to use!
![]() |
Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it. |