SMS/GPRS command - getstatus

Description

Get status about device.

Syntax:

getstatus

Arguments:
This command has no arguments.
Examples:

REQUEST	OUTCOME	RESPONSE
getstatus 13000	Success	Data Link: 1 GPRS: 1 Phone: 1 SIM: 0 OP: 24602 Signal: 5 NewSMS: 0 Roaming: 0 SMSFull: 0 LAC: 115 Cell ID: 1361430 NetType: 2 FwUpd: 65536
getstatus	Fail	No response.

Response explanation:

RESPONSE ELEMENT	DESCRIPTION	EXAMPLE
Data Link	Indicate module connection to server at the moment: 0 – Not connected 1 – Connected	Data Link: 1
GPRS	Indicate if GPRS is available at the moment	GPRS: 1
Phone	Voice Call status: 0 – Ready 1 – Unavailable 2 – Unknown 3 – Ringing 4 – Call in progress 5 – Asleep	Phone: 1
SIM	SIM Status: 0 – Ready 1 – PIN 2 – PUK 3 – PIN2 4 – PUK2 5 - Unknown	SIM: 0
OP	Connected to GSM Operator: numerical ID of operator	OP: 24602
Signal	GSM Signal Quality [0-5]	Signal: 5
NewSMS	Indicate if new message received	NewSMS: 0
Roaming	0 – Home Network 1 – Roaming	Roaming: 0
SMSFull	SMS storage is full? 0 – OK 1 – SMS storage is full	SMSFull: 0
LAC	GSM Tower Location Area Code	LAC: 115
Cell ID	GSM Tower Cell ID Code	Cell ID: 1361430
NetType	Network type which device is connected: 0 – UMTS (3G) 1 – GSM (2G) 2 – LTE (4G) 3 - LTE Cat-M1 (eMTC) 4 - LTE Cat-NB1 (NB-IoT) 99 – Unknown	NetType: 2
FwUpd	Firmware update status: 0 – device has been updated via FOTA WEB / Teltonika Configurator From 1 to 65535 – device update was performed but unsuccessfully. Number shows error ID (ID:65535 unknown error, couldn’t be read) 65536 – device hasn’t been updated since it was turned ON 65537 – Unknown	FwUpd: 65536