TEST-T
Revision as of 09:31, 27 May 2026 by Justinas.strelciunas (talk | contribs)
Race mode
Race Mode is an accuracy focused operating mode that controls periodic record timestamps strictly by GPS time (NMEA). It is designed to improve timestamp precision and prevent unexpected coordinate jumps during movement.
Prerequisites and Important settings
Race Mode should be enabled only when short sending periods are used and high timestamp accuracy is required during movement.
Basic operation
When Race Mode is enabled, periodic record generation is synchronized directly to GNSS time while the device is moving. Records are created only after the configured Min Saving Period elapses, using the timestamp provided by the GPS module together with all required GNSS data.
Compatibility conditions Race Mode is available only when all of the following conditions are met:
- Location source is set to GNSS
- Tracking mode is not Basic (for ATx mini devices)
- Device is in a movement capable tracking mode (e.g. Movement mode)
Limitations, Edge Cases & Additional Notes
Race Mode operates only while device movement is detected. If the device enters On Stop state, or if GNSS fix is lost, periodic records are generated using the standard flow:
- Without GPS data
- Without GPS based time synchronization