FMB206 General description
From Wiki Knowledge Base | Teltonika GPS
Revision as of 10:35, 29 May 2018 by Simkunas.ma (talk | contribs) (Created page with "{{FMB General description|model=FMB206}} {{FMB20X_Package_contents|model=FMB206}} ==Basic characteristics== {{FMB Basic characteristics}} {{FMB20X_Hardware_features|model...")
FMB206 Manual > FMB206 General description
FMB206 is a tracking terminal with GNSS and GSM connectivity, which is able to collect device coordinates and transfer them via GSM network to a server. This device is perfectly suitable for applications, which require the location acquirement of remote objects.
Package contents
The FMB206 device is supplied to the customer in a cardboard box containing all the equipment that is necessary for operation. The package contains:
- FMB206 device with case and wires;
- USB cable (optional);
- Integrated Ni-MH battery 7.2V, 400mAh for FMB206 device;
Basic characteristics
GSM / GPRS / GNSS features:
- Teltonika TM2500 quad band module (GSM 850 / 900 / 1800 / 1900 MHz);
- GPRS Multi-Slot class 12 (Up to 85,6 kbps);
- SMS (text, data);
- Integrated GNSS receiver;
- Up to -165 dBm GNSS receiver sensitivity.
Hardware features:
- 128 MB internal Flash memory (422 400 Records);
- Built-in movement sensor;
- Integrated Ni-MH battery 7.2V, 400mAh for FMB206 device;
- Internal High Gain GSM antenna;
- Internal High Gain GNSS antenna;
The Interface features:
- Power supply: 6 … 30V;
- USB port;
- 3 digital inputs;
- 1 analog input;
- 2 open collector digital outputs (connecting external relays, LED’s, buzzers etc.);
- 1Wire® temperature sensor;
- 1Wire® iButton;
- 2 LED’s indicating device status.
Special features:
- High Quality track even in high density urban canyon;
- Ready for harsh environment;
- Any element event triggers (external sensor, input, speed, temperature, etc.);
- Highly configurable data acquisition and sending;
- Multiple Geo-fence areas;
- Sleep mode;
- Deep sleep mode;
- Configurable scenarios available;
- Real-time process monitoring;
- Authorized number list for remote access;
- Firmware update over GPRS or USB port;
- Configuration update over GPRS, SMS or USB port;
- TCP/IP or UDP/IP protocol support;
- >500000 record storing;
- Overvoltage protection.
| Description | Voltage | Duration |
|---|---|---|
| Normal operation | +6 ... +30 V | Unlimited |
| Protection turns on, device turns off | 34 V | Unlimited |
| Maximum voltage | < 70 V | Unlimited |
| Maximum voltage impulse | 120 V | 10 ms |
Technical features
Technical features
| Part name | Physical specification |
|---|---|
| Navigation indication | LED |
| Modem indication | LED |
| USB | Mini USB socket |
| GNSS | Internal GNSS antenna |
| GSM | Internal GSM antenna |
| Technical details | |
|---|---|
| Power supply 6 ... 30V DC 1.5 W max. device consumption Energy consumption at 12 V: |
GPRS: average 33.5 mA r.m.s; Nominal: average 27,6 mA; GPS Sleep: average 11,6 mA; Online Sleep: average 4 mA; Deep Sleep: average 3,7 mA; Ultra Sleep: average 1,9 mA |
| FMB20X Battery charge current | max. 80 mA |
| Operating temperature (without battery) | -25..+55 °C |
| Storage temperature (without battery) | -40..+70 °C |
| Storage relative humidity | 5..95% (no condensation) |
| Device + case + battery weight |
With 400 mAh bat. - 170 g |
Dimension drawing:
Dimension drawing:
Technical information about internal battery
| Internal back-up battery | Battery voltage (V) | Nominal capacity (mAh) | Power (Wh) | Charging temperature (°C) |
|---|---|---|---|---|
| Ni-MH Prismatic Battery pack | 7.2 ～ 7.5 | 400 | 2.95 - 3.07 | 0 - 50 |
Batteries are covered by 6 month warranty support.
 |
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. |
 |
Battery should not be disposed of into general household waste. Bring damaged or worn-out batteries to your local recycling center or dispose them into a battery recycle bin commonly found in supermarkets. |
Electrical characteristics
| Characteristic description | Value | |||
|---|---|---|---|---|
| Min. | Typ. | Max. | Unit | |
| Supply Voltage: | ||||
| Supply Voltage (Recommended Operating Conditions) |
6 | 30 | V | |
| Digital Output (Open Drain grade): | ||||
| Drain current (Digital Output OFF) | 120 | µA | ||
| Drain current (Digital Output ON, Recommended Operating Conditions) |
0.1 | 0.5 | A | |
| Static Drain-Source resistance (Digital Output ON) | 120 | mΩ | ||
| Digital Input: | ||||
| Input resistance (DIN1) | 59.9 | kΩ | ||
| Input resistance (DIN2, DIN3) | 67.5 | kΩ | ||
| Input voltage (Recommended Operating Conditions) |
0 | 60 | V | |
| Input Voltage threshold (DIN1) | 4 | 4 | 8 | V |
| Input Voltage threshold (DIN2, DIN3) | 2.5 | 2.7 | 3 | V |
| Analog Input: | ||||
| Input voltage (Recommended Operating Conditions), Range 1 |
0 | 10 | V | |
| Input resistance, Range 1 | 120 | kΩ | ||
| Input voltage (Recommended Operating Conditions), Range 2 |
0 | 30 | V | |
| Input resistance, Range 2 | 146.7 | kΩ | ||
| Output Supply Voltage 1-Wire: | ||||
| Supply voltage | 3.8 | V | ||
| Output inner resistance | 450 | 600 | mΩ | |
| Output current (Uout > 3.0 V) | 75 | mA | ||
| Short circuit current (Uout = 0) | 75 | mA | ||
 |
Analog Input error margin can increase if temperature varies. |
Absolute maximum ratings
| Characteristic description | Value | |||
|---|---|---|---|---|
| Min. | Typ. | Max. | Unit | |
| Supply Voltage (Absolute Maximum Ratings) |
-32 | +32 | V | |
| Drain-Source clamp threshold voltage (Absolute Maximum Ratings), (Idrain = 2 mA) |
+36 | V | ||
| Digital Input Voltage (Absolute Maximum Ratings) |
-32 | +32 | V | |
| Analog Input Voltage (Absolute Maximum Ratings) |
-32 | +32 | V | |
