FMA flush
From Wiki Knowledge Base | Teltonika GPS
flush #,#,#,#,#,#,#
Initiates all data sending by GPRS to specified target server. Comma separated parameters go as numbered:
1.# - IMEI
2.# - APN
3.# - GPRS LOGIN
4.# - GPRS PASSWORD
5.# - IP
6.# - PORT
7.# - MODE (0-TCP/1-UDP)
Parameters are separated by comma (no spaces needed). In case you don’t need to enter parameter (Login/Pass) – do not put space, simply put comma and write next parameter.
Example:"opa opa flush 353976012555151,banga,,,212.47.99.62,12050,0"
| Response details | Description |
|---|---|
| FLUSH SMS Accepted | FLUSH SMS Accepted. |
| # records found on FLASH | Number of records found on FLASH. |
| Minimum Records to Send: # | Number of minimum saved records to send. |
| GPRS Enabled: # | State of the GPRS connection, 0 – disabled; 1 – enabled. |
| Time Sync: # | Indicates time synchronization on the device, 0 – not synchronized; 1 – synchronized. |
Example: "FLUSH SMS Accepted. 11 records found on FLASH. Minimum Records to Send: 1. GPRS Enabled: 1. Time Sync: 1"
