Template:FMB1 First start card
From Wiki Knowledge Base | Teltonika GPS
Revision as of 09:26, 24 October 2018 by Mantas.gadliauskas (talk | contribs) (→How to insert {{{sim_type|Micro-}}}SIM card)
GNSS/GSM/Blue-tooth tracker with GNSS/GSM antennas and internal battery
How to insert Micro-SIM card
1. Gently remove FMB1YX cover using plastic pry tool from both sides.
2. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.
3. Attach device cover back.
4. Device is ready to be connected.
How to insert microSD card
1. Push microSD card lock case.
2. Open microSD card locker.
3. Correctly insert microSD card into slot.
4. Close microSD card locker.
5. Push microSD card lock case to locked position.
