Template:FMB64 First start card
Revision as of 14:12, 25 October 2018 by Mantas.gadliauskas (talk | contribs) (→How to insert {{{sim_type|Micro-}}}SIM card)
FMB640 GNSS/GSM/Blue-tooth terminal with GNSS/GSM antennas and Ni-MH battery
How to insert Micro-SIM card
- Unscrew the screws.
- Gently remove FMB1YX cover using plastic pry tool from both sides.
- Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is not pointing forward to slot. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.
- Attach device cover.
- Put the screws back in.
- Device is ready to be connected.
 |
Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it. |
How to insert microSD card
- Push microSD card lock case.
- Open microSD card locker.
- Correctly insert microSD card into slot.
- Close microSD card locker.
- Push microSD card lock case to locked position.
