Template:FMB1 First start card withoutSD

From Wiki Knowledge Base | Teltonika GPS
Revision as of 10:12, 27 February 2019 by Kaminskas.Andrius (talk | contribs) (Created page with "centre <b>{{{description|GNSS/GSM/Blue-tooth tracker with internal GNSS/GSM antennas}}}</b>{{{pic|400px|right}}}...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Qsg rut950 teltonika.PNG


GNSS/GSM/Blue-tooth tracker with internal GNSS/GSM antennas

Fmb120 man.png



How to insert Micro-SIM card

  1. Gently remove FMB1YX cover using plastic pry tool from both sides.
  2. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.
  3. Attach device cover back.
  4. Device is ready to be connected.

Fmb120 cover 1.pngFmb120 cover 2.pngFmb120 cover 3.pngFmb120 cover 4.png

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:FMB1_First_start_card_withoutSD&oldid=28572"