Template:FMB9 First start card

From Wiki Knowledge Base | Teltonika GPS
Qsg rut950 teltonika.PNG

Small and smart tracker with Blue-tooth

Fmb920 main.png




How to insert Micro-SIM card

  • Insert Micro-SIM card as shown with PIN request disabled or

read our Wiki how to enter PIN later in Teltonika Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.

  • Connect battery as shown to device.
  • Connect micro usb cable as shown
  • To power up TST100, connect green plug to the E-scooter
  • Open Teltonika configurator, select TST100 device and

configure it according to your requirements (how to install drives on page

  • Once all done, disconnect TST100 from PC and E-scooter. Attach

the lid by two screws as shown

Sim 1.pngBatt 2.pngUsb 3.pngScrew 4.png


Alert.png
 Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.
Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:FMB9_First_start_card&oldid=34139"