FMB640 CAN \ Tachograph
From Wiki Knowledge Base | Teltonika GPS
Revision as of 10:28, 11 July 2019 by Gediminas.suminas (talk | contribs) (Created page with "==CAN \ Tachograph== ==Tachograph Settings== <br /> '''In FMB640 configurator “CAN/Tachograph” section tachograph settings should be set in order to download files.<br />...")
Main Page > EOL Products > FMB640 > FMB640 Configuration > FMB640 CAN \ Tachograph
CAN \ Tachograph
Tachograph Settings
In FMB640 configurator “CAN/Tachograph” section tachograph settings should be set in order to download files.
DDD download source – to which CAN line tachograph is connected;
Tachograph ignition source – which DIN is connected to vehicle ignition ("Ignition" parameter - tachograph ignition source will be the same as configured in "System" -> "Ignition Source");
WEB Tacho Settings
WEB Tacho Settings are used to configure Tacho WEB server to which device periodically connects.
WEB Tacho Settings:
Status - functionality enabling;
Domain – server domain where files will be send;
Port – server port where files will be send;
Start delay – delay after turning on ignition to start procedure of file sending.
