FMB640 UL202 Ultrasonic Fuel Sensor

From Wiki Knowledge Base | Teltonika GPS

Introduction to the product

UL202 Ultrasonic Fuel Level Sensor connected to FMB640 using RS232 interface.

UL202
Definition of LED light:
• Green light on:
the probe works normally.
• Red light on:
the probe is abnormal (the probe line is not inserted or probe drops off).
Ul202-2.png
Ul202 sensor technical parameters:
Ul202.png

Port definition of user interface - User interface port is used to connect UL202 Ultrasonic Fuel Level Sensor connected to FMB640 using with RS232 interface
Uluserinterface.png

Port definition
Userinterface.png

Installation

Before installation, make sure UL202 Ultrasonic Fuel Level Sensor is not powered ON. The RED and BLACK wires of User Interface line have to be connected to the Power Supply of the vehicle with RED wire connecting the positive role and BLACK wire connecting the ground. UL202 has RS232 serial port output:

FMB640 RS232.png

FMB640 configuration

In order to configurate FMB640 to read UL202 Fuel Sensor information, COM1/2 port have to be selected as “UL202-2 Fuel Sensor”. Default baudrate is 9600.

Ul rs232.png

To receive UL202 Fuel Sensor information to configured server, Ultrasonic UL202 Fuel level and status have to be enabled in “I/O” section.

Ul io.png

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=FMB640_UL202_Ultrasonic_Fuel_Sensor&oldid=40687"