Template:Precautions FMB0

From Wiki Knowledge Base | Teltonika GPS
Revision as of 10:48, 5 August 2019 by Tomas.kriauciunas (talk | contribs) (Reverted edits by Kriauciunas.to (talk) to last revision by Danielekrau)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

Precautions

Bw nb.png Do not disassemble the device. If the device is damaged, the power supply cables are not isolated or the isolation is damaged, DO NOT touch the device before unplugging the power supply.
Bw nb.png All wireless data transferring devices produce interference that may affect other devices which are placed nearby.
Bw key.png Please consult representatives of your vehicle model regarding OBD II location on your vehicle. In case you are not sure about proper connection, please consult qualified personnel.
Bw tick.png The programming must be performed using a PC with autonomic power supply.
Bw humidity.png The device is susceptible to water and humidity.
Bw ecute.png Installation and/or handling during a lightning storm is prohibited.
Bw nb.png Teltonika is not responsible for any harm caused by wrong cables used for connection between PC and FMB1YX.
Bw nb.png WARNING! Do not use FMB1YX device if it distracts driver or causes inconvenience due to OBD II placement. Device must not interfere with driver.
Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:Precautions_FMB0&oldid=41999"