Template:FMB1 LED status
Revision as of 12:51, 8 June 2020 by Sandra.Gasyte (talk | contribs) (Undo revision 58395 by SandraG (talk))
This section is an explanation of LED indications on an FMB1YX device.
| Behaviour | Meaning |
|---|---|
| Permanently switched on | GNSS signal is not received |
| Blinking every second | Normal mode, GNSS is working |
| Off | GNSS is turned off because: Device is not working or Device is in sleep mode |
| Blinking fast constantly | Device firmware is being flashed |
Status LED Indications
| Behaviour | Meaning |
|---|---|
| Blinking every second | Normal mode |
| Blinking every two seconds | Sleep mode |
| Blinking fast for a short time | Modem activity |
| Off | Device is not working or Device is in boot mode |
CAN Status LED indications
| Behaviour | Meaning |
|---|---|
| Blinking fast constantly | Reading CAN data from vehicle |
| Permanently switched on | Wrong program number or wrong wire connection |
| Off | Wrong connection or CAN processor in sleep mode |