LED Status
From Wiki Knowledge Base | Teltonika GPS
Revision as of 15:06, 23 March 2021 by Mantas.zemaitis (talk | contribs) (Created page with "This section is an explanation of LED indications of Teltonika device. ==Navigation LED Indications== <table class="nd-othertables_2" style="width:60%;"> <tr> <th r...")
This section is an explanation of LED indications of Teltonika device.
| Behaviour | Meaning |
|---|---|
| Permanently switched on | GNSS signal is not received |
| Blinking every second | Normal mode, GNSS is working |
| Off | GNSS is turned off because: Device is not working or Device is in sleep mode |
| Blinking fast constantly | Device firmware is being flashed |
Status LED Indications
| Behaviour | Meaning |
|---|---|
| Blinking every second | Normal mode |
| Blinking every two seconds | Sleep mode |
| Blinking fast for a short time | Modem activity |
| Off | Device is not working or Device is in boot mode |
CAN Status LED indications
| Behaviour | Meaning |
|---|---|
| Blinking fast constantly | Reading CAN data from vehicle |
| Permanently switched on | Wrong program number or wrong wire connection |
| Off | Wrong connection or CAN processor in sleep mode |
