Jump to content
  • EN

Template:FMB1 First start card withoutSD

From Teltonika Telematics Wiki
Revision as of 09:56, 19 January 2022 by Gediminas.suminas (talk | contribs) (→How to insert {{{sim_type|Micro-}}}SIM card)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)


GNSS/GSM/Blue-tooth tracker with internal GNSS/GSM antennas



How to insert Micro-SIM card

  1. Gently remove FMX2YX cover using plastic pry tool from both sides.
  2. Disassemble the device, remove both sides from the PCB
  3. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.
  4. Connect the battery
  5. Place the battery in the housing
  6. Attach device cover back.


 Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.
Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:FMB1_First_start_card_withoutSD&oldid=70250"