DSM First Start

From Wiki Knowledge Base | Teltonika GPS
Revision as of 08:53, 5 October 2022 by MindaugasK (talk | contribs) (Created page with "==PC Calibration== right | 320x320px Driver Setup (ONLY SUPPORTS WINDOWS OS) * NOTE: Before you connect or start calibration, please install RNDIS dri...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > Video Solutions > DSM > DSM First Start

PC Calibration

DSM Calib.png

Driver Setup (ONLY SUPPORTS WINDOWS OS)

  • NOTE: Before you connect or start calibration, please install RNDIS driver first.

Calibration Setup

  • Access MDSM-22 Calibration page via PC
    • Connect MDSM-22 to PC using Micro USB cable with 5 pins.
    • Power on MDSM-22. If you hear repeated beep sound, this means MDSM-22 is properly connected to computer.
    • Activate the browser and enter into http://20.0.0.1:18087/ to access MDSM-22 calibration page. Google Chrome is recommended.
    • If you see the page below, please select language you want and sign in using following information
 ‐ ID: admin ‐ Password: 1234

Calibration

  • Select Speed Type
    • GPS Speed setting - GPS antenna is embedded on MDSM-22. If GPS work correctly, detected is shown. If GPS doesn’t work for 5 mins, Fail is shown.
Retrieved from "https://wiki.teltonika-gps.com/index.php?title=DSM_First_Start&oldid=76656"