Advanced Pulse Counter
From Wiki Knowledge Base | Teltonika GPS
Revision as of 16:12, 18 October 2022 by Rytis.liucvaikis (talk | contribs)
Functionality description
If this function is active, then all other settings associated with the this input are disabled.
Frequency measurement can be performed in 2 different ways:
- Frequency is measured by counting pulses over time period (997 ms). Method is used for frequencies higher than 100 Hz.
- Frequency is measured by measuring time between pulses. Method is used for frequencies lower than 100 Hz.
Parameter values
System parameters (ID = 145). Device/Available/Input port/Frequency:
| Device | DIN1 | DIN2 | DIN4 | |||
|---|---|---|---|---|---|---|
| 50Hz | 2kHz | 50Hz | 2kHz | 50Hz | 2kHz | |
| FMB0 | + | |||||
| FMB110/FMB120/FMB130/FMB140 | + | + | ||||
| FMB202/FMB204/FMB209 | + | + | ||||
| FMB920 | ||||||
| FMC130 | ||||||
