DSM Configuration
Revision as of 15:57, 1 December 2022 by MindaugasK (talk | contribs)
Main Page > Video Solutions > DSM > DSM Configuration
Device configuration
- It is necessary to change Data Protocol to Codec 8 Extended in the "System" tab.
- In RS232\RS485 settings under RS232 Settings navigate to COM1 settings and in Mode parameter selection, open the drop-down menu and select DSM, please also keep the baudrate set to default which is 115200
- Make sure to change DSM I/O feature Priorities to Low, High or Panic (Based on your needs). Also set operand and low/high settings in order to receive events based on specific conditions, e.g.: Yawning - Low priority - Low/High level 0 - Operand On Exit. This would mean that if the person yawns, the camera will detect this scenario, the parameter level will jump from 0 to 1 and will exit the configured high level which is set on exit. This will generate an event and send it to the configured server.
- In order to receive event data, a server has to be configured. Navigate to GPRS settings and enter the server details under Server #1 Settings. Details such as domain name and port number are required to be entered.
General settings
- Measurement Units - can either be metric or imperial, Global standard are metric units while in some cases like US and UK - measurement standard is Imperial units.
- Volume level - sets the volume level of DSM camera alerts
- Camera block repeat alarm - DSM camera will release a warning sound if the camera is blocked. This setting allows the camera to repeat warnings until the camera view is clear.
Image/recording settings
- Voice recording -
- Overlay text -
- Mirror display -
- Video format -
- Recording ratio -
- G-sensor sensitivity -
Event settings
- Working speed source -
- Automatic transmit (global) -
Drowsiness
- Activation -
- Vibration -
- Automatic transmit -
Distraction
- Activation -
- Vibration -
- Automatic transmit -
Phone
- Activation -
- Vibration -
- Automatic transmit -