Revision as of 12:30, 23 March 2023 by Martyna.D(talk | contribs)(Protected "TST100 GSM Operators settings" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)))
TST100 can work in different modes (use different settings) according to the operator list defined. Operator list is used for Data Acquisition mode switching (see Data acquisition settings section for more details). Modes are changed based on GSM operator TST100 is connected to.
Roaming operator list
If roaming operator list is left empty, TST100 will automatically detect home operator. If home operator is written to the roaming operator list, it will still be detected as home operator. Any operator not in the roaming operator list (except the home operator) will be recognized as unknown operator and TST100 will work in Unknown mode (make sure it is configured to allow data sending – GPRS context is enabled). Operator search procedure is initiated as normal every 15 minutes and tries to connect to an operator providing the strongest signal. It will prioritize operators which are specified in the operator list. If no operators from the operator list are available, the device will try to connect to an operator from the blacklist. If no suitable operator is found on both lists, the device will try to connect to a remaining available operator with the strongest signal.
NOTE!
Up to 50 operators may be entered to this list.
Operator black list
If user does not want TST100 to connect and work with a particular operator it has to be written to Operator Blacklist. If device connects to an operator from the blacklist, best operator search procedure is initiated instantly. During the time when device is connected to blacklisted operator no GPRS connection would be initiated and no data would be sent via GPRS. However, the ability to send SMS commands to the device would remain.
NOTE!
Up to 50 operators may be entered to this list.
Common Settings
Ban list control - Enables or disables the Black list.
