TST100 Auto Geofence settings
From Wiki Knowledge Base | Teltonika GPS
Revision as of 11:57, 24 March 2023 by Martyna.D (talk | contribs) (Protected "TST100 Auto Geofence settings" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)))
Main Page > E-Mobility Trackers > TST100 > TST100 Configuration > TST100 Auto Geofence settings
Auto Geofence
AutoGeofence is based on the last known position after the movement has stopped. You can be notified using this function if your device leaves certain area. The shape and size of Geofence zones are set by parameters. It is possible to state whether entering or leaving the geofence triggers an asynchronous message. AutoGeofencing options can be configured by following parameters:
- Eventual Records - is used to enable or disable Eventual Records functionality.
- Generate Event - Event generation can take place on Geofence
Entrance,Exitor onBoth. - Activation timeout - defines the delay between the creation of AutoGeofence within set radius. Activation timeout defines the delay between the creation of AutoGeofence within set Radius value around machine's most recent position and when the ignition is off.
- Radius - value around device's most recent position and when the ignition is off.
| NOTE | AutoGeofencing does not require entering coordinates, instead it requires GPS visibility. |
|---|
