TAT140 Stable firmware

CAUTION! Both firmwares (Modem and BlueNRG) must be flashed into device. Failing so can lead to unexpected device behavior and rapid battery discharge.

TAT140 BlueNRG & Modem FIRMWARE UPDATE GUIDE

---

TATXYZ FIRMWARE UPDATE GUIDE

Download Firmware and Configurator from STABLE FIRMWARE or SHORT-TERM FIRMWARE pages.

After device connection to Configurator:
1) Select Update firmware;
2) Select to flash Firmware(*.e.XIM) file;
3) Click on file;
4) And select Open.

Wait until the device will upload the firmware.

When parameters successfully loaded:
1) Select Update firmware;
2) Select to flash BlueNRG firmware(*.bin);
3) Click on file;
4) And select Open.

TAT140 Stable Firmware and Software

STABLE FIRMWARE FIRMWARE VERSION: N/A CONFIGURATOR VERSION: N/A BlueNRG VERSION: N/A RELEASE DATE: N/A

DOWNLOAD Firmware & BlueNRG for [TAT140] Firmware & BlueNRG for [TAT100 HW31] Firmware & BlueNRG for [TAT100 HW62] Configurator DOWNLOAD ALL DOWNLOAD ALL FOR [TAT140] DOWNLOAD ALL FOR [TAT100 HW31] DOWNLOAD ALL FOR [TAT100 HW62] Backup FMB Firmware On request via Teltonika HelpDesk

CHANGELOG

VERSION	RELEASE DATE	CONFIGURATOR CHANGES	FIRMWARE CHANGES
Firmware version: 55.00.16.Rev.569 BlueNRG version: 1.0.3.Rev.00 Configurator version: 1.7.74_E.TAT1_R.7	2024.08.19	Added an option to configure TLS functionality. Added an option to configure SMS record sending. Added an option to configure MQTT Azure and AWS support. Added an option to configure I am alive feature.	Added TLS functionality feature. Added SMS record sending feature. Added MQTT Azure and AWS support. Added I am alive feature. Fixed X, Y and Z IO elements not being included with First Power On record. Extended On Stop and On Move periodic timers to maximum value of 7 days. Improvements to Static Navigation logic in no GPS situation. New AVL ID 69 value added (4 - no GPS in Static Navigation). Improved Recovery mode trigger logic in Lost Sensor scenario. Added error code when BLE sensor is lost.

VERSION	RELEASE DATE	CONFIGURATOR CHANGES	FIRMWARE CHANGES
Firmware version: 55.00.16.Rev.564 BlueNRG version: 0.4.12 Configurator version: 1.7.74_B.TAT1_R.6	2024.03.12	Fixed configurator crash after firmware update. Added cell ID I/O elements	Fixed periodic timer starting in Recovery mode. Improved backup tracker scan procedure. Fixed issue with GPS fix with First Power On record. Improved energy management in sleep mode when device is in motion. Fixed crash on BLE sensor alarm. Bluetooth scanning and data parsing optimization. DNS resolve improvements. Fixed periodic timer starting when tracking scenario selected as None. Added cell ID I/O elements
Firmware version: 55.00.16.Rev.558 BlueNRG version: 0.4.8 Configurator version: 1.7.16_B.TAT1_R.3	2023.07.18	* Removed non configurable elements	[FIX] Improved EYE sensor data detection to be suitable for all sensor modes [FIX] Fixed Periodic timer still running when Recovery mode is activated in sleep from Backup tracker [FIX] Hotfix for EG915ULA modem status commands

VERSION	RELEASE DATE	CONFIGURATOR CHANGES	FIRMWARE CHANGES
Firmware version: 55.00.16.Rev.557 BlueNRG version: 0.4.7 Configurator version: 1.7.16_B.TAT1_R.1	2023.05.10	Initial release	Initial release