Configuring Blue Puck/Coin sensors

From Wiki Knowledge Base | Teltonika GPS
Revision as of 14:10, 6 December 2023 by Arnas.Zeb (talk | contribs) (Text replacement - "Bluetooth" to "Bluetooth®")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Pages with broken file links > Configuring Blue Puck/Coin sensors

Configuring Blue Puck/Coin sensors

Device manager sensor.jpg

Bluetooth® LE Blue Puck and Blue Coin sensors are disabled by default. Configurations to these sensors are written through NFC.
To do this download Device Manager Mobile by Ela from Google Play Store to your Android-powered device.
Note! Android-powered device that is used for configuring Blue Puck/Coin sensors must support NFC read/write functionality.

Follow these instructions to easily configure Blue Puck/Coin Bluetooth® LE sensor:

  • Enable Bluetooth® and NFC on your Android-powered device.
  • Launch Device Manager Mobile on your Android-powered device.
  • Select Configuration.
  • Place your Android-powered device on top of Blue Puck/Coin sensor to scan it.
  • Click Enable to allow Blue Puck/Coin sensor transmit advertising data. If it shows a tick, it is already connected to your phone.
  • We recommend to set Power to 4 to get the best possible distance.
  • Set BLE Emit Period to 1 seconds to get best possible sensor detection.
  • Click Write button.
  • Place your Android-powered device on top of Blue Puck/Coin sensor to write configuration to it.

Once the configuration is written successfully, the Blue Puck/Coin sensor will be enabled and use the settings configured in the APP.

NOTE! Make sure that Manufacturer data mode is Disabled, otherwise BLE sensor will not be detected without additional changes in the device configuration.

Configuring device with Blue Puck/Coin sensors

File:Bluetooth® general.png
These are instructions on how to easily read data from Blue Puck/Coin Bluetooth® LE sensor with the chosen device.

First the device Bluetooth® settings need to be configured. These are the required steps:
  • Press Bluetooth® settings.
  • Turn on BT Radio by pressing Enable (hidden) or Enable (visible).
  • Press Bluetooth® 4.0 settings.
  • Select Advanced in BLE connectionless functionalities section.
BLE connectionless functionalities advanced.png

  • MAC address NRF.jpg
    Type your Blue Puck/Coin MAC address in MAC field. You can check what is your MAC address by using nRF connect for Mobile app from Google Play.
  • Configure the sensor fields according to the type of sensor used. More information about these settings can be found on Blue Puck/Coin presets section.
  • After all these steps press Save to device to save configuration.
  • To start BLE scan right away press Discover BLE.


TZ-BT04_05_05B_data

To check if the device has already received data from Blue Puck/Coin Bluetooth® LE sensor, follow these steps:

  • Navigate toStatus section.
  • Press I/O Info and look if BLE Temp, BLE Battery and BLE Humidity has any values (depends on the type of sensor being used).

Blue Puck/Coin presets

Using premade Blue Puck/Coin sensor presets

The configurator can include premade presets for sensors such as Blue PUCK/COIN MOV, MAG, T, RHT and etc.

BLE Presets v2.gif
NOTE! In order to have sensor presets included in the configurator, every preset has to be recorded in the configuration, saved to a file and placed to Documents folder of your computer.


Also, premade sensor presets can be downloaded using this Download zip.png

To read data from Blue Puck/Coin sensors, Sensor table must be configured with specified parameters to a particular sensor.

Blue Puck/Coin T

Bluetooth® LE Temperature sensor configuration

Type Data Offset Data Size Action IO Match Endianess Multiplier Offset
FE 5 2 Match None 6E2A Little Endian 1 0
FE 7 2 Save Temperature Big Endian 0.1 0


Blue Puck/Coin RHT

Bluetooth® LE Temperature and Humidity sensor configuration

Type Data Offset Data Size Action IO Match Endianess Multiplier Offset
FE 5 2 Match None 6E2A Little Endian 1 0
FE 7 2 Save Temperature Big Endian 0.1 0
FE 11 2 Match None 6F2A Little Endian 1 0
FE 13 1 Save Humidity Little Endian 10 0


Blue Puck/Coin MAG

Bluetooth® LE Magnet sensor configuration

Type Data Offset Data Size Action IO Match Endianess Multiplier Offset
FE 5 2 Match None 062A Little Endian 1 0
FE 7 2 Save Custom Little Endian 1 0


Blue Puck/Coin MOV

Bluetooth® LE Movement sensor configuration

Type Data Offset Data Size Action IO Match Endianess Multiplier Offset
FE 5 2 Match None 062A Little Endian 1 0
FE 7 2 Save Custom Little Endian 1 0
Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Configuring_Blue_Puck/Coin_sensors&oldid=93451"