Template:FMB965 First start card

Small and smart tracker with Bluetooth

How to insert Nano-SIM card

1. Gently remove {{{model}}} cover using plastic pry tool from both sides.
2. gently lift the PCB out of the cover
3. Insert Nano-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Nano-SIM card cut-off corner is pointing outwards to slot.
4. Connect the battery as shown on device.
5. Place PCB back into the place as shown in the picture, first the end that is marked as 1 needs to inserted, then the end that is marked as 2
6. Attach device cover back. Device is ready to be connected.

Nano-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Nano-SIM card might be damaged or device will not detect it.