Changes

BTS firmware errata (view source)

Revision as of 10:38, 23 February 2024

3,039 bytes added ,  23 February
Added 1.2.9.R.9 firmware to Errata
Line 1: Line 1:  +
=== Introduction ===
 +
We are always improving our device's performance, stability, and reliability. That’s why Teltonika is one of the leading GNSS trackers manufacturers in the world.
    +
This document describes '''BTSXXX platform''' devices firmware improvements, changes, new features implementations as well as current firmware release version.
 +
 +
=== Firmware versioning ===
 +
 +
* Structure
 +
 +
BTS.VER.[<code>X</code>].[<code>Y</code>].[<code>Z</code>].R.[<code>#</code>]
 +
 +
* Syntax description
 +
** <code>X</code> – major FW version.
 +
** <code>Y</code> – branch number, shows major changes in firmware, i.e. new module support added or new major feature added.
 +
** <code>Z</code> – major changes like bigger fixes, improvements and new features addition.
 +
** <code>#</code> – minor changes like small fixes and improvements.
 +
 +
=== Firmware versions ===
 +
{| class="wikitable"
 +
|+
 +
!FIRMWARE VERSION
 +
! colspan="2" |SUPPORTED HARDWARE
 +
|-
 +
!1.2.z.R.#
 +
| colspan="2" |BTSID1, BTSMP1
 +
|+
 +
!FIRMWARE VERSION
 +
!RELEASE DATE
 +
!CHANGES
 +
|-
 +
|1.2.10.R.04
 +
|2023.11.30
 +
|
 +
* [[EYE FUNCTIONALITIES#Customized%20Sensor%20Selection|Active Sensor Selection]]: Users can customize their device by selecting only the sensors they require. This allows users to specify which sensor information is read and advertised, ensuring power-efficient data collection and transmission.
 +
* [[EYE FUNCTIONALITIES#12%20characters%20name|12 character name]]: Users can now assign names of up to 12 characters. Enabling them to configure their device with a full MAC address as the name.
 +
* [[EYE FUNCTIONALITIES#Auto-Disconnect%20Timer|Auto-Disconnect Timer]] the device will disconnect from applications if not used for longer than 2 minutes without authorizing with PIN or after 10 minutes if inactive after authorizing.
 +
* Improved pitch and roll response time to give up-to-date data.
 +
* The device no longer restarts after changing configuration parameters.
 +
* Other stability improvements
 +
|-
 +
|1.2.9.R.9
 +
|2024.02.23
 +
|
 +
* Battery voltage sending with iBeacon and Eddystone advertisement protocols fixed
 +
|-
 +
|1.2.9.R.8
 +
|2023.05.01
 +
|
 +
* [https://wiki.teltonika-gps.com/view/EYE_FUNCTIONALITIES#Hibernate_mode| Hibernate functionality]
 +
* [https://wiki.teltonika-gps.com/view/EYE_FUNCTIONALITIES#PUK_code| PUK unlock functionality]
 +
* [[EYE FAQ#What is battery voltage when the battery is considered empty.3F|Battery low level flag changed from 2.7V to 2.2V]]
 +
* Device is advertising every 1s after configuration change is saved for 1 minute to allow easier reconnection.
 +
* Slight power consumption optimizations
 +
* Stability improvements
 +
|-
 +
|1.2.8.R.2
 +
|2022.12.14
 +
|
 +
* iBeacon protocol not triggering region monitoring on iOS.
 +
* iBeacon protocol EYE devices not showing up in EYE App on Android devices running Android 13 based operating systems.
 +
|-
 +
|1.2.8.R.1
 +
|2022.07.21
 +
|
 +
* Default advertising interval increased from 1 to 5 seconds
 +
* Other stability and consumption improvements
 +
* Calibrated RSSI values for Eddystone and iBeacons
 +
|-
 +
|1.2.1.R.0
 +
|2021.11.01
 +
|
 +
* First base firmware release
 +
|}
Retrieved from "https://wiki.teltonika-gps.com/view/Special:MobileDiff/74951...96099"

Navigation menu