264
edits
Changes
Added 1.2.9.R.9 firmware to Errata
|+
|+
!FIRMWARE VERSION
!FIRMWARE VERSION
!SUPPORTED HARDWARE
! colspan="2" |SUPPORTED HARDWARE
|-
|-
!1.2.Z.R.#
!1.2.z.R.#
|BTSID1, BTSMP1
| colspan="2" |BTSID1, BTSMP1
|+
|+
!FIRMWARE VERSION
!FIRMWARE VERSION
!CHANGES
!CHANGES
|-
|-
|'''1.2.8.R.1'''(recommended for BTSID1 and BTSMP1 devices)
|1.2.10.R.04
|2023.11.30
|
* [[EYE FUNCTIONALITIES#Customized%20Sensor%20Selection|Active Sensor Selection]]: Users can customize their device by selecting only the sensors they require. This allows users to specify which sensor information is read and advertised, ensuring power-efficient data collection and transmission.
* [[EYE FUNCTIONALITIES#12%20characters%20name|12 character name]]: Users can now assign names of up to 12 characters. Enabling them to configure their device with a full MAC address as the name.
* [[EYE FUNCTIONALITIES#Auto-Disconnect%20Timer|Auto-Disconnect Timer]] the device will disconnect from applications if not used for longer than 2 minutes without authorizing with PIN or after 10 minutes if inactive after authorizing.
* Improved pitch and roll response time to give up-to-date data.
* The device no longer restarts after changing configuration parameters.
* Other stability improvements
|-
|1.2.9.R.9
|2024.02.23
|
* Battery voltage sending with iBeacon and Eddystone advertisement protocols fixed
|-
|1.2.9.R.8
|2023.05.01
|
* [https://wiki.teltonika-gps.com/view/EYE_FUNCTIONALITIES#Hibernate_mode| Hibernate functionality]
* [https://wiki.teltonika-gps.com/view/EYE_FUNCTIONALITIES#PUK_code| PUK unlock functionality]
* [[EYE FAQ#What is battery voltage when the battery is considered empty.3F|Battery low level flag changed from 2.7V to 2.2V]]
* Device is advertising every 1s after configuration change is saved for 1 minute to allow easier reconnection.
* Slight power consumption optimizations
* Stability improvements
|-
|1.2.8.R.2
|2022.12.14
|
* iBeacon protocol not triggering region monitoring on iOS.
* iBeacon protocol EYE devices not showing up in EYE App on Android devices running Android 13 based operating systems.
|-
|1.2.8.R.1
|2022.07.21
|2022.07.21
|
|
* Calibrated RSSI values for Eddystone and iBeacons
* Calibrated RSSI values for Eddystone and iBeacons
|-
|-
|'''1.2.1.R.0'''
|1.2.1.R.0
|2021.11.01
|2021.11.01
|
|
* First base firmware release
* First base firmware release
|}
|}