Changes

Codec JSON (view source)

Revision as of 12:54, 10 February 2023

8 bytes added ,  12:54, 10 February 2023
→‎AWS Custom
Line 22: Line 22:     
==='''AWS Shadow'''===
 
==='''AWS Shadow'''===
−
AWS shadow allows to retain device state, this service reports only the latest Shadow state data. Using this mode does not allow sending commands to device or receiving responses.<br>
+
AWS shadow allows to retain device state, this service reports only the latest Shadow state data. Using this mode does not allow sending commands to device or receiving responses.<br>When using this mode JSON format must be enabled, otherwise, data sending will not begin.
 +
Using this service device uses x509 certificates to authenticate. No other method is possible. https://docs.aws.amazon.com/iot/latest/developerguide/x509-client-certs.html<br>Doc: https://docs.aws.amazon.com/iot/latest/developerguide/iot-device-shadows.html
   −
When using this mode JSON format must be enabled, otherwise, data sending will not begin.
+
==='''AWS Custom'''===
−
Using this service device uses x509 certificates to authenticate. No other method is possible. https://docs.aws.amazon.com/iot/latest/developerguide/x509-client-certs.html<br>
     −
Doc: https://docs.aws.amazon.com/iot/latest/developerguide/iot-device-shadows.html<br><br>
+
This mode allows configuring custom topic names, where data will be published and commands received.
 +
When using this mode all Codec protocols are supported (Codec8, Codec8E (E-Extended), Codec JSON).  
   −
==='''AWS Custom'''===
+
Full Codec description can be found [[Codec#Codec 8|'''here''']].
   −
This mode allows configuring custom topic names, where data will be published and commands received.
  −
When using this mode all Codec protocols are supported (Codec8, Codec8ext, Codec JSON).
   
Authentication is the same as AWS Shadow.
 
Authentication is the same as AWS Shadow.
   Line 38: Line 37:       −
Codec JSON is available as a transmission codec now ('''since the fw 03.27.05.Rev.250'''''), this parameter can be selected in the '''Teltonika’s Configurator>> System>> System Settings>> Data Protocol>> and selecting Codec JSON'''<br>''
+
 
 +
Codec JSON is available as a transmission Codec,  ''this parameter can be selected in:''
 +
 
 +
'''''Teltonika Configurator >> System >> System Settings >> Data Protocol >> and selecting Codec JSON'''<br>''
 
[[File:MQTT Server.png|center|frameless|300x300px]]  
 
[[File:MQTT Server.png|center|frameless|300x300px]]  
   −
Additionally, to develop the full configuration in the Teltonika device, make sure to use the '''MQTT protocol''', this can be done in the '''''teltonika's configurator>>GPRS Server Settings>> and in protocol selecting MQTT.'''''
+
Additionally, to develop the full configuration in the Teltonika device, make sure to use the '''MQTT protocol'''.
 +
 
 +
This can be done in '''''Teltonika configurator >> GPRS Server Settings >> and in protocol selecting MQTT.'''''
 
   
 
   
−
It is important to note that the communication to the AWS IoT Service uses a TLS certificate to authenticate, please follow this link where is explained how to obtain it:
+
'''Note.''' communication to the AWS IoT Service uses a TLS certificate to authenticate, please follow this link where is explained how to obtain it:
 +
 
 
[[https://wiki.teltonika-gps.com/view/Getting_Started_with_AWS_IoT_Core#Provision_the_Device_with_credentials]]  
 
[[https://wiki.teltonika-gps.com/view/Getting_Started_with_AWS_IoT_Core#Provision_the_Device_with_credentials]]  
  
Retrieved from "https://wiki.teltonika-gps.com/view/Special:MobileDiff/80055"

Navigation menu