DashCam Data Sending Parameters ID

Main Page > Video Solutions > Teltonika DashCam > DashCam Data Sending Parameters ID

DashCam/DualCam RS232 camera support

DashCam camera support was introduced from firmware version 03.27.13.Rev.662. A new RS232 mode "DashCam" was added with parameters for setting control. The details of the RS232 mode parameter are provided in the table below.

Parameter name Parameter ID Parameter value Parameter description
RS232 Mode 151 18 DualCam
RS232 Mode 151 26 DashCam

Configuration version 8.19.5.0 has to be used if the configuration is being made in offline mode.

Camera Feature Settings Parameters ID

Once this mode is enabled, new tab “Camera Settings” appears on the left sidebar. This will contain the main parameters for configuring the camera settings The parameter IDs and values are provided in the table below. Once configuration is saved to device, these parameters are updated.

Parameter name Parameter ID Parameter values Default values
Camera Picture Resolution 66000
0 - 160 x 120 3
1 - 320 x 240
2 - 640 x 480
3 - 1280 x 720
4 - 1920 x 1080
Camera Picture Compression 66001 [0 - 100] (%) 50
OSD Display 66002 0 - Disabled 0
1 - Enabled
Video Frame Rate 66003 20, 25 and 30 (frames per second) 30
File transfer priority 66025 0 - Picture 2
1 - Video
2 - Alternating
Camera Time Zone 66024

-720 – UTC-12:00
-690 – UTC-11:30
-660 – UTC-11:00
-630 – UTC-10:30
-600 – UTC-10:00
-570 – UTC-09:30
-540 – UTC-09:00
-510 – UTC-08:30
-480 – UTC-08:00
-450 – UTC-07:30
-420 – UTC-07:00
-390 – UTC-06:30
-360 – UTC-06:00
-330 – UTC-05:30
-300 – UTC-05:00
-270 – UTC-04:30
-240 – UTC-04:00
-210 – UTC-03:30
-180 – UTC-03:00
-150 – UTC-02:30
-120 – UTC-02:00
-90 – UTC-01:30
-60 – UTC-01:00
-30 – UTC-00:30
0 – UTC+00:00
30 – UTC+00:30
60 – UTC+01:00
90 – UTC+01:30
120 – UTC+02:00
150 – UTC+02:30
180 – UTC+03:00
210 – UTC+03:30
240 – UTC+04:00
270 – UTC+04:30
300 – UTC+05:00
330 – UTC+05:30
360 – UTC+06:00
390 – UTC+06:30
420 – UTC+07:00
450 – UTC+07:30
480 – UTC+08:00
510 – UTC+08:30
540 – UTC+09:00
570 – UTC+09:30
600 – UTC+10:00
630 – UTC+10:30
660 – UTC+11:00
690 – UTC+11:30
720 – UTC+12:00
750 – UTC+12:30
780 – UTC+13:00
810 – UTC+13:30
840 – UTC+14:00

UTC+00:00

OSD display - On Screen Display feature displays date and time in the upper left corner of the photo. This feature can be enabled or disabled.

Camera Feature Settings Parameters ID (for FMx650 devices)

Parameter ID for FMX650 device Parameter values for FMX650 device
Camera Resolution Picture COM1 DashCam - 1011000
COM2 DashCam - 1012000
0 - 160 x 120
1 - 320 x 240
2 - 640 x 480
3 - 1280 x 720
4 - 1920 x 1080
Camera Picture Compression COM1 DashCam - 1011001
COM2 DashCam - 1012001
[0 – 100] (%)
OSD Display COM1 DashCam - 1011002
COM2 DashCam - 1012002
0 – Disabled
1 - Enabled
Video Frame Rate COM1 DashCam - 1011003
COM2 DashCam - 1012003
20 – 20 FPS
25 - 25 FPS
30 - 30 FPS
File Transfer Priority COM1 DashCam - 1011025
COM2 DashCam - 1012025
0 - Picture

1 - Video

2 - Alternating

Camera Time Zone COM1 DashCam - 1011024
COM2 DashCam - 1012024
-720 – UTC-12:00

-690 – UTC-11:30

-660 – UTC-11:00

-630 – UTC-10:30

-600 – UTC-10:00

-570 – UTC-09:30

-540 – UTC-09:00

-510 – UTC-08:30

-480 – UTC-08:00

-450 – UTC-07:30

-420 – UTC-07:00

-390 – UTC-06:30

-360 – UTC-06:00

-330 – UTC-05:30

-300 – UTC-05:00

-270 – UTC-04:30

-240 – UTC-04:00

-210 – UTC-03:30

-180 – UTC-03:00

-150 – UTC-02:30

-120 – UTC-02:00

-90 – UTC-01:30

-60 – UTC-01:00

-30 – UTC-00:30

0 – UTC+00:00

30 – UTC+00:30

60 – UTC+01:00

90 – UTC+01:30

120 – UTC+02:00

150 – UTC+02:30

180 – UTC+03:00

210 – UTC+03:30

240 – UTC+04:00

270 – UTC+04:30

300 – UTC+05:00

330 – UTC+05:30

360 – UTC+06:00

390 – UTC+06:30

420 – UTC+07:00

450 – UTC+07:30

480 – UTC+08:00

510 – UTC+08:30

540 – UTC+09:00

570 – UTC+09:30

600 – UTC+10:00

630 – UTC+10:30

660 – UTC+11:00

690 – UTC+11:30

720 – UTC+12:00

750 – UTC+12:30

780 – UTC+13:00

810 – UTC+13:30

840 – UTC+14:00

Camera Scenario Settings Parameters ID

"Camera settings" tab also contains scenario settings that trigger camera video/photo capture when specific condition is met.

Parameter name Parameter ID Parameter values Default values
Periodic Image sending 66006 0 - Disabled 0
1 - Front Camera
Sending interval 66007 [10-1800] (seconds) 600
Image Sending Trigger 66022
0 - None 0
2 - DIN1
4 - DIN2
8 - Crash
16 - Towing
32 - Idling
64 - Geofence
128 - Unplug
256 - Green Driving
Video sending trigger 66023
0 - None 0
2 - DIN1
4 - DIN2
8 - Crash
Video duration before trigger 66009 [1-10] (seconds) 5
Video duration after trigger 66010 [1-10] (seconds) 5
Camera Scenario Mode 66020
0 - On Ignition 0
1 - Always
Video source for trigger DIN1 66040
0 - None 0
1 - Front
Video source for trigger DIN2 66041
0 - None 0
1 - Front
Video source for trigger Crash 66042
0 - None 0
1 - Front

Camera Scenario Settings Parameters ID (for FMx650 devices)

Parameter ID for FMX650 device Parameter Values for FMX650 device
Periodic Image Sending COM1 DashCam - 1011006
COM2 DashCam - 1012006
0 - Disabled
1 - Front Camera
2 - Rear Camera
3 - Both Cameras
Sending Interval COM1 DashCam - 1011007
COM2 DashCam - 1012007
[10 - 1800] (seconds)
Image Sending Trigger COM1 DashCam - 1011022
COM2 DashCam - 1012022
2 - DIN1
4 - DIN2
8 - DIN3
16 - DIN4
32 - Crash
64 - Towing
128 - Idling
256 - Geofence
512 - Unplug
1024 - Green Driving
Video Sending Trigger COM1 DashCam - 1011023
COM2 DashCam - 1012023
0 - None
1 - DIN1
2 - DIN2
3 - Crash
Video duration before Trigger COM1 DashCam - 1011009
COM2 DashCam - 1012009
[0 - 15] (seconds)
Video duration after Trigger COM1 DashCam - 1011010
COM2 DashCam - 1012010
[0 - 15] (seconds)
Camera Scenario Mode COM1 DashCam - 1011020
COM2 DashCam - 1012020
0 - On Ignition
1 - Always
Video Source for Trigger DIN1 COM1 DashCam - 1011040
COM2 DashCam - 1012040
0 - None

1 - Front

2 - Rear

3 - Front and Rear

Video Source for Trigger DIN2 COM1 DashCam - 1011041
COM2 DashCam - 1012041
Video Source for Trigger DIN3 COM1 DashCam - 1011044
COM2 DashCam - 1012044
Video Source for Trigger DIN4 COM1 DashCam - 1011045
COM2 DashCam - 1012045
Video Source for Trigger Crash COM1 DashCam - 1011042
COM2 DashCam - 1012042


Video sending by trigger parameters ID

Video sending by trigger camera scenario monitors the selected trigger (video sending trigger parameter) and captures video from the camera before and after the event (video duration before trigger and video duration after trigger parameters). If the previously captured video has not finished downloading, then a new video capture is skipped until the old one has been sent. When this scenario is triggered, high priority eventual record is generated with the value corresponding to what triggered the scenario. See the table below.

Parameter name Parameter AVL ID Parameter value
SOS trigger 499 0 - Server request
1 - DIN1
2 - DIN2
3 - Crash

Image sending trigger parameters ID

Added Image sending trigger option (works the same way as Video sending trigger just triggers image sending).

For selecting multiple options using SMS/GPRS commands, add values of every option and set that value for this parameter.

For example, to set DIN1 (2), Crash (8), and Unplug (128) scenarios as triggers, add their values (2 + 4 + 128 = 138) and set the sum as the parameter value

Parameter name Parameter AVL ID Parameter value
SOS trigger 499 0 - Server request
1 - DIN1
2 - DIN2
3 - Crash
4 - Towing
5 - Idling
6 - Geofence
7 - Unplug
8 - Green Driving

Camera ping transmission and TF status checking parameters ID

Camera pinging was implemented to periodically check if a camera is connected to a device. This is done via “Get TF status” command for camera every 20 seconds when ignition is on. The received result from this command is stored in the corresponding AVL element “Front camera state”. The following do not only store TF status, but also if response from the camera was received or not.

Parameter name Parameter AVL ID for FMx125, FMx225 devices Parameter AVL ID for FMx650 devices Parameter Values
Front Camera State: 498 COM1 DashCam - 12303
COM2 DashCam - 12306
0 - Camera not detected
1 - No Card
2 - Card mount failed
3 - Card mounted
4 - Card faulty