Changes

Date and time parameter specifications (view source)

Revision as of 14:02, 16 December 2021

7,270 bytes added ,  14:02, 16 December 2021
no edit summary
Line 1: Line 1: −
Date_and_time_parameter_specifications
+
== Seconds ==
 +
This parameter shall indicate the component “seconds” of the current time of day. This should be reported as the seconds of the current time at UTC; however, it may be reported as the component seconds of the current time at a local time zone. The local hour/minute offset parameters are used to indicate if the time of day is the current UTC time or a local time zone time. The parameter shall be implemented as specified in table 1:
 +
{| class="wikitable"
 +
|+Table 1 — Specification of parameter seconds
 +
!Attribute
 +
!Value
 +
|-
 +
|Data length
 +
|1 byte
 +
|-
 +
|Resolution
 +
|0,25 s/bit
 +
|-
 +
|Offset
 +
|0 s
 +
|-
 +
|Operating range
 +
|0 s to 59,75 s
 +
|-
 +
|Type
 +
|Measured
 +
|-
 +
|DID
 +
|n/a, used as part of other DIDs
 +
|-
 +
|Access
 +
| -
 +
|}
 +
 
 +
== Minutes ==
 +
This parameter shall indicate the component “minutes” of the current time of day. This should be reported as the minutes of the current time at UTC; however, it may be reported as the component minutes of the current time at a local time zone. The local hour/minute offset parameters are used to indicate if the time of day is the current UTC time or a local time zone time. The parameter shall be implemented as specified in Table 2.
 +
{| class="wikitable"
 +
|+Table 2 — Specification of parameter minutes
 +
!Attribute
 +
!Value
 +
|-
 +
|Data length
 +
|1 byte
 +
|-
 +
|Resolution
 +
|1 min/bit
 +
|-
 +
|Offset
 +
|0 min
 +
|-
 +
|Operating range
 +
|0 min to 59 min
 +
|-
 +
|Type
 +
|Measured
 +
|-
 +
|DID
 +
|n/a, used as part of other DIDs
 +
|-
 +
|Access
 +
| -
 +
|}
 +
 
 +
== Hours ==
 +
This parameter shall indicate the component “hour” of the current time of day. This should be reported as the hours of the current time at UTC; however, it may be reported as the component hours of the current time at a local time zone. The local hour/minute offset parameters are used to indicate if the time of day is the current UTC time or a local time zone time. The parameter shall be implemented as specified in Table 3.
 +
{| class="wikitable"
 +
|+Table 3 — Specification of parameter hours
 +
!Attribute
 +
!Value
 +
|-
 +
|Data length
 +
|1 byte
 +
|-
 +
|Resolution
 +
|1 h/bit
 +
|-
 +
|Offset
 +
|0 h
 +
|-
 +
|Operating range
 +
|0 h to 23 h
 +
|-
 +
|Type
 +
|Measured
 +
|-
 +
|DID
 +
|n/a, used as part of other DIDs
 +
|-
 +
|Access
 +
| -
 +
|}
 +
 
 +
== Day ==
 +
This parameter shall indicate the component “day” of the current time of day. This should be reported as the day of the current time at UTC; however, it may be reported as the component day of the current time at a local time zone. The local hour/minute offset parameters are used to indicate if the time of day is the current UTC time or a local time zone time. The parameter shall be implemented as specified in Table 4.
 +
{| class="wikitable"
 +
|+Table 4 — Specification of parameter day
 +
!Attribute
 +
!Value
 +
|-
 +
|Data length
 +
|1 byte
 +
|-
 +
|Resolution
 +
|0,25 d/bit
 +
|-
 +
|Offset
 +
|0 d
 +
|-
 +
|Operating range
 +
|0,25 d to 31,75 d
 +
|-
 +
|Type
 +
|Measured
 +
|-
 +
|DID
 +
|n/a, used as part of other DIDs
 +
|-
 +
|Access
 +
| -
 +
|}
 +
NOTE: A value of 0 for the day is null. The values [1, 2, 3, 4] indicate the first day of a month, the values [5, 6, 7, 8] indicate the second day of the month, etc. This parameter does not influence or change the hours parameter above.
 +
 
 +
== Month ==
 +
This parameter shall indicate the component “month” of the current time of day. This should be reported as the month of the current time at UTC; however, it may be reported as the component month of the current time at a local time zone. The local hour/minute offset parameters are used to indicate if the time of day is the current UTC time or a local time zone time. The parameter shall be implemented as specified in Table 5.
 +
{| class="wikitable"
 +
|+Table 5 — Specification of parameter month
 +
!Attribute
 +
!Value
 +
|-
 +
|Data length
 +
|1 byte
 +
|-
 +
|Resolution
 +
|1 month/bit
 +
|-
 +
|Offset
 +
|0 month
 +
|-
 +
|Operating range
 +
|1 month to 12 months
 +
|-
 +
|Type
 +
|Measured
 +
|-
 +
|DID
 +
|n/a, used as part of other DIDs
 +
|-
 +
|Access
 +
| -
 +
|}
 +
NOTE: a value of 0 is null. A value of 1 identifies January, 2 identifies February, etc.
 +
 
 +
== Year ==
 +
This parameter shall indicate the component “year” of the current time of day. This should be reported as the year of the current time at UTC; however, it may be reported as the component year of the current time at a local time zone. The local hour/minute offset parameters are used to indicate if the time of day is the current UTC time or a local time zone time. The parameter shall be implemented as specified in Table 6.
 +
{| class="wikitable"
 +
|+Table 6 — Specification of parameter year
 +
!Attribute
 +
!Value
 +
|-
 +
|Data length
 +
|1 byte
 +
|-
 +
|Resolution
 +
|1 year/bit
 +
|-
 +
|Offset
 +
|1985 year
 +
|-
 +
|Operating range
 +
|1985 year to 2235 year
 +
|-
 +
|Type
 +
|Measured
 +
|-
 +
|DID
 +
|n/a, used as part of other DIDs
 +
|-
 +
|Access
 +
| -
 +
|}
 +
NOTE: a value of 0 identifies year 1985, 1 identifies year 1986, etc.
 +
 
 +
== Local minute offset ==
 +
This parameter shall indicate the component “minute” of the offset between the UTC time and date and a local time zone time and date, and is defined as the number of minutes to add to UTC time and date to convert into the time and date of local time zone.
 +
 
 +
— The local offset is a positive value for time zones east of the prime meridian to the International Date Line.
 +
 
 +
— The local offset is a negative value for time zones west of the prime meridian to the International Date Line.
 +
 
 +
The local minute offset is only applicable when the time and date parameters are reported as UTC time and date. The parameter shall be implemented as specified in Table 7.
 +
{| class="wikitable"
 +
|+Table 7 — Specification of parameter local minute offset
 +
!Attribute
 +
!Value
 +
|-
 +
|Data length
 +
|1 byte
 +
|-
 +
|Resolution
 +
|1 min/bit
 +
|-
 +
|Offset
 +
|−125 min
 +
|-
 +
|Operating range
 +
|−59 min to 59 min
 +
|-
 +
|Type
 +
|Measured
 +
|-
 +
|DID
 +
|n/a, used as part of other DIDs
 +
|-
 +
|Access
 +
| -
 +
|}
 +
NOTE: for the recording unit, it represents an offset from UTC set by the driver. The valid range is further limited by legal requirements.
 +
 
 +
== Local hour offset ==
 +
This parameter shall indicate the component “hour” of the offset between the UTC time and date and a local time zone time and date, and is defined as the number of hours to add to UTC time and date to convert into the time and date of local time zone.
 +
 
 +
— The local offset is a positive value for time zones east of the prime meridian to the International Date Line.
 +
 
 +
— The local offset is a negative value for time zones west of the prime meridian to the International Date Line.
 +
 
 +
The local hour offset is only applicable when the time and date parameters are reported as UTC time and date. The parameter shall be implemented as specified in Table 8.
 +
{| class="wikitable"
 +
|+Table 8 — Specification of parameter local hour offset
 +
!Attribute
 +
!Value
 +
|-
 +
|Data length
 +
|1 byte
 +
|-
 +
|Resolution
 +
|1 h/bit
 +
|-
 +
|Offset
 +
|−125 h
 +
|-
 +
|Operating range
 +
|−23 h to 23 h
 +
|-
 +
|Type
 +
|Measured
 +
|-
 +
|DID
 +
|n/a, used as part of other DIDs
 +
|-
 +
|Access
 +
| -
 +
|}
 +
NOTE: for the recording unit, it represents an offset from UTC set by the driver.
 +
 
 +
== Time and date parameter group ==
 +
The parameter group is referenced in other parameter specifications and shall be implemented as specified in Table 9.
 +
{| class="wikitable"
 +
|+Table 9 — Content specification of parameter group time and date
 +
!Byte position
 +
!Bit position
 +
!Parameter
 +
|-
 +
|1
 +
|
 +
|Seconds
 +
|-
 +
|2
 +
|
 +
|Minutes
 +
|-
 +
|3
 +
|
 +
|Hours
 +
|-
 +
|4
 +
|
 +
|Day
 +
|-
 +
|5
 +
|
 +
|Month
 +
|-
 +
|6
 +
|
 +
|Year
 +
|-
 +
|7
 +
|
 +
|Local minute offset
 +
|-
 +
|8
 +
|
 +
|Local hour offset
 +
|}
Retrieved from "https://wiki.teltonika-gps.com/view/Special:MobileDiff/69572"

Navigation menu