Difference between revisions of "EYE FUNCTIONALITIES"

Latest revision as of 17:06, 8 December 2023

Page Description

This page will describe EYE device functionalities, their value flow and required hardware, firmware and software versions.

EYE APP 1.2.2-89

Search device with QR scan

Functionality: Now you can find devices with QR scan by pressing scan button and scanning device QR code.

Firmware: 1.2.1.R.0+

Value: Easier device management

Flow: 1. Tap 2. scan the QR code engraved onto EYE device

Customized Sensor Selection

Functionality: Users can disable sensors reading leaving only the sensors they require.

Firmware: 1.2.10.R.4+

Value: Data saving, battery life can be expanded by disabling accelerometer.

Flow: 1. Connect to EYE device 2. Click "configure" 3. Expand Active sensors tab 4. Uncheck sensors you want to deactivate 4. Save your configuration.

Auto-Disconnect Timer

Functionality: After 2 minutes of inactivity, users will be automatically disconnected from the device. Before disconnection, you will have the option to maintain the connection.

Firmware: 1.2.10.R.4+

Value: Enhanced privacy and energy saving.

Flow: 1. Connect to EYE device 2. Do not perform any saving actions for 2 minutes.

Battery voltage display

Functionality: Eye App now provides a clear and convenient readout of the battery's voltage level, keeping users informed about their device's power status.

Firmware: 1.2.1.R.0+

Value: Keeping users informed about their device's power status.

Flow: 1. Expand sensor card in the overview screen or connect to the device

12 characters name

Functionality: Users can now assign names of up to 12 characters,

Firmware: 1.2.1.R.0+

Value: A full MAC address can be used as the name.

Flow: 1. Connect to EYE device 2. Click "configure" 3. Expand Name settings drop down 4. Enter desired name 4. Save your configuration.

EYE APP 1.2.0-63

PIN code

Functionality: Eye App will time-out users on for 5 minutes after 5 unsuccessful PIN attempts

Firmware: 1.2.1.R.0 to 1.2.8.R.2

Value: Enhanced privacy

Flow: 1. Tap the selected device to connect to it 2. Enter PIN incorrectly, fail to enter PIN correctly 4 more times 3. Wait 5 minutes for timeout to end.

PUK code

Functionality: Eye App will block users that fail PIN 10 times.

Firmware: 1.2.9.R.8+

Value: Enhanced privacy

Lock flow: 1. Tap the selected device to connect to it 2. Enter PIN incorrectly, fail to enter PIN correctly 4 more times 3. Wait 5 minutes for timeout to end. 4. Tap the selected device to connect to it 5. Enter PIN incorrectly, fail to enter PIN correctly 4 more times. 6. Requirement to enter PUK code will now appear. PUK code is provided by support.

Unlock flow: 1. Tap the blocked device to connect to it 2. Enter PUK correctly 3. You will be connected, PIN will be reset to default

Hibernate mode:

Functionality: Eye App will allow users to send their devices back to hibernate mode

Firmware: 1.2.9.R.8+

Hardware: BTSID1 hibernate version or any BTSMP1

Value: Battery saving

Wake up flow: 1. Take magnet 2. Attach magnet to hibernating device 3. Wait for LED to blink.

Send to hibernate flow: 1. While connected and in overview tap "Send device to sleep". 2. Confirm your selection 3. Wait for EYE App to disconnect:

@@ Line 1: / Line 1: @@
-This will describe functionalities when they were added and their flow.
+__TOC__
+=== Page Description ===
+This page will describe EYE device functionalities, their value flow and required hardware, firmware and software versions.
-Functionalities:
+==EYE APP 1.2.2-89==
+===Search device with QR scan===
+'''Functionality''': Now you can find devices with QR scan by pressing scan button [[File:EYE_APP_QR_BUTTON.png|frameless|25x25px]] and scanning device QR code.
-Connecting to the device
+'''Firmware''': 1.2.1.R.0+
-{| class="wikitable"
-|+
-!Step No.
-!1
-!2
-!3
-!
-!
-|-
-| Step desc.
-|Tap the selected device to connect to it
-|Enter PIN
-|Connected
-|
-|
-|-
-|Successful attempt at functionality visual
-|
-[[File:TapToConnect.png|alt=|frameless]]
-|[[File:PIN Code.png|frameless]]
-|[[File:Overview - with an update (beacon).png|frameless]]
-|
-|
-|-
-|Step desc.
-|Tap the selected device to connect to it
-|Enter PIN incorrectly
-|Fail to enter PIN correctly 4 more times
-|Wait for 5 min timeout and enter PIN incorrectly
-|Fail to enter PIN correctly 4 more times
-|-
-|Failed attempt at functionality visual
-|[[File:TapToConnect.png|alt=|frameless]]
-|[[File:PIN Code (error).png|File:PIN_Code_(error).png|alt=|frameless]]
-|[[File:Device blocked.png|alt=Device blocked|frameless]]
-|[[File:PIN Code (error).png|File:PIN_Code_(error).png|alt=|frameless]]
-|[[File:Device blocked.png|alt=Device blocked|frameless]]
-|-
-|Suppoted versions
-|EYE APP: 1.2.0-60+
+'''Value''': Easier device management
-Firmware: 1.2.1.R.0 to 1.2.8.R.2
+'''Flow:''' 1. Tap [[File:EYE_APP_QR_BUTTON.png|frameless|25x25px]] 2. scan the QR code engraved onto EYE device <br><br>[[File:EYE_APP_QR_PRESS_BUTTON.png|frameless|250px]][[File:EYE_APP_QR_SCAN.png|frameless|250px]][[File:EYE_APP_QR_SCAN_EXAMPLE.png|frameless|250px]]
-|
-|
-|
-|
-|}
-{| class="wikitable"
+===Customized Sensor Selection===
-|+
+'''Functionality''': Users can disable sensors reading  leaving only the sensors they require.
-!Step No.
-!1
-!2
-!3
-!
-!
-|-
-|Step desc.
-| Tap the selected device to connect to it
-|Enter PIN
-|Connected
-|
-|
-|-
-|Successful attempt at functionality visual
-|
-[[File:TapToConnect.png|alt=|frameless]]
-|[[File:PIN Code.png|frameless]]
-|[[File:Overview - with an update (beacon).png|frameless]]
-|
-|
-|-
-|Step desc.
-| Tap the selected device to connect to it
-|Enter PIN incorrectly
-|Fail to enter PIN correctly 4 more times
-|Wait for 5 min timeout and enter PIN incorrectly
-|Fail to enter PIN correctly 4 more times
-|-
-|Failed attempt at functionality visual
-|[[File:TapToConnect.png|alt=|frameless]]
-|[[File:PIN Code (error).png|File:PIN_Code_(error).png|alt=|frameless]]
-|[[File:Device blocked.png|alt=Device blocked|frameless]]
-|[[File:PIN Code (error).png|File:PIN_Code_(error).png|alt=|frameless]]
-|[[File:Device blocked (PUK).png|alt=Device blocked|frameless]]
-|-
-|Suppoted versions
-|EYE APP: 1.2.0-60+
+'''Firmware''': 1.2.10.R.4+
-Firmware: 1.2.9.R.8+
+'''Value''': Data saving, battery life can be expanded by disabling accelerometer.
-|
-|
-|
-|
-|}
+'''Flow:''' 1. Connect to EYE device  2. Click "configure"  3. Expand Active sensors tab 4. Uncheck sensors you want to deactivate 4. Save your configuration.<br><br>[[File:EYE_APP_CHOOSE_ONE_SENSORS.png|frameless|250px]][[File:EYE_APP_ONE_SENSOR_VIEW.png|frameless|250px]][[File:EYE_APP_CHOOSE_FOUR_SENSORS.png|frameless|250px]][[File:EYE_APP_FOUR_SENSOR_VIEW.png|frameless|250px]]
+===Auto-Disconnect Timer===
+'''Functionality''': After 2 minutes of inactivity, users will be automatically disconnected from the device. Before disconnection, you will have the option to maintain the connection.
-PUK code unlock:
+'''Firmware''': 1.2.10.R.4+
-{| class="wikitable"
+'''Value''': Enhanced privacy and energy saving.
-|+
-!Step No.
-!1
-!2
-!3
-|-
-|Step desc.
-|Tap the blocked device to connect to it
-|Enter PUK
-|Connected
-|-
-|Successful attempt at functionality visual
-|
-[[File:TapToConnect.png|alt=|frameless]]
-|[[File:PUK Code.png|File:PUK Code.png]|alt=|frameless]]
-|[[File:Connected PIN reset.png|frameless]]
-|-
-|Step desc.
-|Tap the selected device to connect to it
-|Enter PIN incorrectly
-|Fail to enter PIN correctly 4 more times
-|-
-|Failed attempt at functionality visual
-|[[File:TapToConnect.png|alt=|frameless]]
-|[[File:PUK Code (error).png|File:PUK Code (error).png|alt=|frameless]]
-|
-|-
-|Suppoted versions
-|EYE APP: 1.2.0-60+
+'''Flow:''' 1. Connect to EYE device  2.  Do not perform any saving actions for 2 minutes.<br><br>[[File:EYE_APP_TWO_MINUTE_WAIT.png|frameless|250px]][[File:EYE_APP_DISCONNECTED_AFTER_TWO_MINUTES.png|frameless|250px]][[File:EYE_APP_DISCONNECTED_WHILE_CONFIGURING.png|frameless|250px]]
-Firmware: 1.2.9.R.8+
+===Battery voltage display===
-|
+'''Functionality''': Eye App now provides a clear and convenient readout of the battery's voltage level, keeping users informed about their device's power status.
-|
-|}
+'''Firmware''': 1.2.1.R.0+
+'''Value''': Keeping users informed about their device's power status.
+'''Flow:''' 1. Expand sensor card in the overview screen or connect to the device<br><br>[[File:EYE_APP_VISIBLE_BATTERY_VOLTAGE.png|frameless|250px]]
+===12 characters name===
+'''Functionality''': Users can now assign names of up to 12 characters,
+'''Firmware''': 1.2.1.R.0+
+'''Value''':  A full MAC address can be used as the name.
+'''Flow:''' 1. Connect to EYE device  2. Click "configure"  3. Expand Name settings drop down 4. Enter desired name  4. Save your configuration.<br>[[File:EYE APP 12 CHAR NAME.png|frameless|250px]]
+==<big>EYE APP 1.2.0-63</big>==
+===PIN code===
+'''Functionality''': Eye App will time-out users on for 5 minutes after 5 unsuccessful PIN attempts
+'''Firmware''': 1.2.1.R.0 to 1.2.8.R.2
+'''Value''': Enhanced privacy
+'''Flow:''' 1. Tap the selected device to connect to it 2. Enter PIN incorrectly, fail to enter PIN correctly 4 more times 3. Wait 5 minutes for timeout to end.
+[[File:Screenshot 20230503 165303 EYE APP edited.jpg|frameless|250px]][[File:Screenshot 20230509 1518232 EYE APP.jpg|frameless|250px]][[File:Screenshot 20230509 152802 EYE APP.jpg|frameless|250px]]
+===PUK code ===
+'''Functionality''': Eye App will block users that fail PIN 10 times.
+'''Firmware''': 1.2.9.R.8+
+'''Value''': Enhanced privacy
+'''Lock flow:''' 1. Tap the selected device to connect to it 2. Enter PIN incorrectly, fail to enter PIN correctly 4 more times 3. Wait 5 minutes for timeout to end. 4. Tap the selected device to connect to it 5. Enter PIN incorrectly, fail to enter PIN correctly 4 more times. 6. Requirement to enter PUK code will now appear. PUK code is provided by support.
+[[File:Screenshot 20230503 165303 EYE APP edited.jpg|frameless|200px]][[File:Screenshot 20230509 1518232 EYE APP.jpg|frameless|200px]][[File:Screenshot 20230509 152802 EYE APP.jpg|frameless|200px]][[File:Screenshot 20230509 151823 EYE APP.jpg|frameless|200px]][[File:Screenshot 20230509 175501 EYE APP PinnAttemptAfter5min.jpg|frameless|200px]]
+'''Unlock flow:''' 1. Tap the blocked device to connect to it 2. Enter PUK correctly 3. You will be connected, PIN will be reset to default
+[[File:Screenshot 20230503 165303 EYE APP edited.jpg|frameless|200px]][[File:Device screen 1.2.8 2.jpg|frameless|200px]]
+[[File:PUK insert.jpg|frameless|200px]]
+===Hibernate mode:===
+'''Functionality''': Eye App will allow users to send their devices back to hibernate mode
+'''Firmware''': 1.2.9.R.8+
+Hardware: BTSID1 hibernate version or any BTSMP1
+'''Value''': Battery saving
+'''Wake up flow:''' 1. Take magnet 2. Attach magnet to hibernating device 3. Wait for LED to blink.
+[[File:520746_Magnet_EYE_gif_v1.6-min.gif|alt=|left|240x240px|link=https://wiki.teltonika-gps.com/view/File:520746_Magnet_EYE_gif_v1.6-min.gif]]<br>
+'''Send to hibernate flow:''' 1. While connected and in overview tap "Send device to sleep". 2. Confirm your selection 3. Wait for EYE App to disconnect:
+[[File:Device screen 1.2.8 2.jpg|400x400px]][[File:Screenshot 20230509 173323 EYE APP.jpg|400x400px]][[File:Screenshot 20230512 164509 Gallery.jpg|400x400px]]