Difference between revisions of "EYE FUNCTIONALITIES"

Latest revision as of 17:06, 8 December 2023

Page Description

This page will describe EYE device functionalities, their value flow and required hardware, firmware and software versions.

EYE APP 1.2.2-89

Search device with QR scan

Functionality: Now you can find devices with QR scan by pressing scan button and scanning device QR code.

Firmware: 1.2.1.R.0+

Value: Easier device management

Flow: 1. Tap 2. scan the QR code engraved onto EYE device

Customized Sensor Selection

Functionality: Users can disable sensors reading leaving only the sensors they require.

Firmware: 1.2.10.R.4+

Value: Data saving, battery life can be expanded by disabling accelerometer.

Flow: 1. Connect to EYE device 2. Click "configure" 3. Expand Active sensors tab 4. Uncheck sensors you want to deactivate 4. Save your configuration.

Auto-Disconnect Timer

Functionality: After 2 minutes of inactivity, users will be automatically disconnected from the device. Before disconnection, you will have the option to maintain the connection.

Firmware: 1.2.10.R.4+

Value: Enhanced privacy and energy saving.

Flow: 1. Connect to EYE device 2. Do not perform any saving actions for 2 minutes.

Battery voltage display

Functionality: Eye App now provides a clear and convenient readout of the battery's voltage level, keeping users informed about their device's power status.

Firmware: 1.2.1.R.0+

Value: Keeping users informed about their device's power status.

Flow: 1. Expand sensor card in the overview screen or connect to the device

12 characters name

Functionality: Users can now assign names of up to 12 characters,

Firmware: 1.2.1.R.0+

Value: A full MAC address can be used as the name.

Flow: 1. Connect to EYE device 2. Click "configure" 3. Expand Name settings drop down 4. Enter desired name 4. Save your configuration.

EYE APP 1.2.0-63

PIN code

Functionality: Eye App will time-out users on for 5 minutes after 5 unsuccessful PIN attempts

Firmware: 1.2.1.R.0 to 1.2.8.R.2

Value: Enhanced privacy

Flow: 1. Tap the selected device to connect to it 2. Enter PIN incorrectly, fail to enter PIN correctly 4 more times 3. Wait 5 minutes for timeout to end.

PUK code

Functionality: Eye App will block users that fail PIN 10 times.

Firmware: 1.2.9.R.8+

Value: Enhanced privacy

Lock flow: 1. Tap the selected device to connect to it 2. Enter PIN incorrectly, fail to enter PIN correctly 4 more times 3. Wait 5 minutes for timeout to end. 4. Tap the selected device to connect to it 5. Enter PIN incorrectly, fail to enter PIN correctly 4 more times. 6. Requirement to enter PUK code will now appear. PUK code is provided by support.

Unlock flow: 1. Tap the blocked device to connect to it 2. Enter PUK correctly 3. You will be connected, PIN will be reset to default

Hibernate mode:

Functionality: Eye App will allow users to send their devices back to hibernate mode

Firmware: 1.2.9.R.8+

Hardware: BTSID1 hibernate version or any BTSMP1

Value: Battery saving

Wake up flow: 1. Take magnet 2. Attach magnet to hibernating device 3. Wait for LED to blink.

Send to hibernate flow: 1. While connected and in overview tap "Send device to sleep". 2. Confirm your selection 3. Wait for EYE App to disconnect:

@@ Line 2: / Line 2: @@
 === Page Description ===
-This page will describe EYE device functionalities, their value flow and required firmware and software versions,
+This page will describe EYE device functionalities, their value flow and required hardware, firmware and software versions.
-===EYE APP 1.2.2-89===
+==EYE APP 1.2.2-89==
 ===Search device with QR scan===
 '''Functionality''': Now you can find devices with QR scan by pressing scan button [[File:EYE_APP_QR_BUTTON.png|frameless|25x25px]] and scanning device QR code.
@@ Line 32: / Line 32: @@
 '''Flow:''' 1. Connect to EYE device  2.  Do not perform any saving actions for 2 minutes.<br><br>[[File:EYE_APP_TWO_MINUTE_WAIT.png|frameless|250px]][[File:EYE_APP_DISCONNECTED_AFTER_TWO_MINUTES.png|frameless|250px]][[File:EYE_APP_DISCONNECTED_WHILE_CONFIGURING.png|frameless|250px]]
-===Visible battery voltage===
+===Battery voltage display===
 '''Functionality''': Eye App now provides a clear and convenient readout of the battery's voltage level, keeping users informed about their device's power status.
@@ Line 78: / Line 78: @@
 [[File:Screenshot 20230503 165303 EYE APP edited.jpg|frameless|200px]][[File:Device screen 1.2.8 2.jpg|frameless|200px]]
 [[File:PUK insert.jpg|frameless|200px]]
+===Hibernate mode:===
+'''Functionality''': Eye App will allow users to send their devices back to hibernate mode
+'''Firmware''': 1.2.9.R.8+
+Hardware: BTSID1 hibernate version or any BTSMP1
+'''Value''': Battery saving
+'''Wake up flow:''' 1. Take magnet 2. Attach magnet to hibernating device 3. Wait for LED to blink.
+[[File:520746_Magnet_EYE_gif_v1.6-min.gif|alt=|left|240x240px|link=https://wiki.teltonika-gps.com/view/File:520746_Magnet_EYE_gif_v1.6-min.gif]]<br>
@@ Line 84: / Line 97: @@
-====<u>Hibernate mode:</u>====
-===== Wake up: =====
+'''Send to hibernate flow:''' 1. While connected and in overview tap "Send device to sleep". 2. Confirm your selection 3. Wait for EYE App to disconnect:
-{| class="nd-othertables_2" style="width:60%;"
-!SW version requirements
-! colspan="5" |Firmware: 1.2.9.R.8+
-|-
-|Step No.
-|1-3
-|4
-|
-|-
-|Short step desc.
-|Attach magnet to sleeping device and wait for LED to blink.
-|Device starts broacasting
-|
-|-
-|Additional desc.
-|
-|Now device is discoverabled, scannable, connectable via BLE.
-|
-|-
-|Successful attempt at functionality visual
-|[[File:520746_Magnet_EYE_gif_v1.6-min.gif|alt=|left|240x240px|link=https://wiki.teltonika-gps.com/view/File:520746_Magnet_EYE_gif_v1.6-min.gif]]
-|
-|
-|}
-===== Send to sleep: =====
+[[File:Device screen 1.2.8 2.jpg|400x400px]][[File:Screenshot 20230509 173323 EYE APP.jpg|400x400px]][[File:Screenshot 20230512 164509 Gallery.jpg|400x400px]]
-{| class="nd-othertables_2" style="width:80%;"
-!SW version requirements
-! colspan="3" |EYE APP: 1.2.0-60+
-Firmware: 1.2.9.R.8+
-|-
-|Step No.
-|1
-|2
-|3
-|-
-|Short step desc.
-|While connected and in overview tap "Send device to sleep"
-|Confirm your selection
-|Wait for EYE App to disconnect
-|-
-|Additional desc.
-|
-|
-|Device is no longer connectable or findable until wake up step is performed.
-|-
-|Successful attempt at functionality visual
-|[[File:Device screen 1.2.8 2.jpg|left|thumb|400x400px|link=https://wiki.teltonika-gps.com/view/File:Device_screen_1.2.8_2.jpg]]
-|[[File:Screenshot 20230509 173323 EYE APP.jpg|left|thumb|400x400px|link=https://wiki.teltonika-gps.com/view/File:Screenshot_20230509_173323_EYE_APP.jpg]]
-|[[File:Screenshot 20230512 164509 Gallery.jpg|left|thumb|400x400px|link=https://wiki.teltonika-gps.com/view/File:Screenshot_20230512_164509_Gallery.jpg]]
-|}