633
edits
Changes
no edit summary
[[File:Mounting recomendations 1.jpg]]
[[File:Mounting recomendations 1.jpg]]
==Configurating EYE sensor==
==Configuration==
Devices work constantly and are ready to perform out of the box. Default basic Sensor settings are set to:
Devices work constantly and are ready to perform out of the box. Default basic Sensor settings are set to:
<br>• Transmitting at 2 dBm power.
<br>• Transmitting at 2 dBm power.
<br>[[File:QR.jpg]]
<br>[[File:QR.jpg]]
===Eye app window description===
===Eye app===
'''With the application you will be able to scan for visible Teltonika EYE devices, check their statuses or connect for configuration or firmware update.'''
'''With the application you will be able to scan for visible Teltonika EYE devices, check their statuses or connect for configuration or firmware update.'''
<br>
<br>
[[File:Magnetic field event.png|frameless]]
[[File:Magnetic field event.png|frameless]]
===Teltonika configurator===
'''Configurator GUI changes'''
<br>
Bluetooth 4.0 functionalities were reorganized and transfered to Bluetooth 4.0 configuration tab with additional horizontal tabs selection for specific settings:
* '''Global''' - Parameters responsible for device scanning ability like power and duratations.
* '''Beacons''' - Parameters to enable Beacon scanning scenarios.
* '''Sensors''' - Configurable custom sensors support.
* '''EYE''' - Parameters to configure data reading from EYE sensors.
<br>
[[File:Configurator GUI changes.png]]
<br>
<br>
'''Common settings'''
<br>
* '''Non Stop Scan''' - Enable Non Stop Scan feature, the device will try to scan for the sensors all the time if any of them are configured.
* '''Sensors and Beacons Update frequency''' - changes sensors temperature/humidity/battery voltage data update frequency. Minimum value: 30s, maximum value: 65535s, default value: 30.
* '''BLE Scan Duration''' - Sensors data reading time.
* '''Scan retries until error''' - Scan retries count, till start to show the value as Error '3000' - sensor disconnected.
* '''BT Power Level''' - Telematics device Bluetooth power level setting.
* '''BLE Broadcasting service ID''' - Telematics device can broadcast configured ID.
* ''' BLE connection control''' - Connection mode settings. If broadcasting ID is configured, parameter should be set to Prohibit.
<br>
'''Sensors'''
<br>
[[File:Sensor (advanced mode).png]]
<br>
<br>
* '''Working mode''' - Bluetooth connection mode.
* '''Disabled''' - Bluetooth 4.0 connection will not be used.
* '''TZ-BT04/05/05B sensor''' - this Bluetooth connection will be used to communicate with TZ-BT04/05/05B sensor.
* '''Advanced''' - It allows to gather data from BLE devices broadcast packets regardless of what data packing protocol is used.
<br>
'''EYE Sensor'''
<br>
<br>
EYE Sensor functionality allows to configure MAC addresses for 4 sensors that user wants to read
<br>
[[File:Sensor 1 EYE.png]]
<br>
<br>
'''I/O elements'''
<br>
<br>
This table describes I/O elements which were added for EYE sensor and proximity functionalities
<br>
[[File:Added IO elements.png]]
==Protocol overwiev==
==Protocol overwiev==