EYE SENSOR Test

From Wiki Knowledge Base | Teltonika GPS
Main Page > Advanced Trackers > EYE SENSOR Test

Introduction

Wireless solutions open up new horizons for your business and help to keep an eye on your assets. Discover our brand-new and certified Bluetooth® Low Energy ID sensor model from Teltonika with robust waterproof casing and a long-lifetime battery. The model is designed for a low-cost fast and easy configuration and integration to save precious time, resources, and ensure accountability.

BTSMP1-datasheet-2023-12-18.2.png

About BTSMP1

Perfect for traceability use cases, delivery tracking, monitoring of various movable objects in logistics (trailers, containers), agriculture (tractor attachments), and constructions (tools and inventory). Sensors data makes it especially suitable for cold chain refrigerator use cases. The built-in accelerometer can detect item movement, pitch and roll of the device. Magnet detection can be used for wireless open/close detection and notifications such as trailer door events, etc. EYE sensor supports iBeacon and Eddystone protocols. The device is fully compatible with the Teltonika firmware platform which provides extended functionality. Configure, scan, and update anytime anywhere with a dedicated Teltonika mobile app

Product Specification

Features

Functionalities
Beacon ID, LED, Temperature, Humidity, Accelerometer, Magnet detection
Dimensions and weight
Dimensions 56,6 mm x 38 mm x 13 mm
Weight 18g
Battery and power
Model CR2450
Type Type Lithium, Manganese Dioxide
Total Capacity 600 mAh
Replaceable No
Battery life (Tx=2 dBm; interval: 3 s) 2.5+ years
Battery life (Tx=2 dBm; interval: 5 s), default 4+ years
Battery life (Tx=2 dBm; interval: 10 s) 5+ years
Connectivity
Bluetooth® Bluetooth® 4.2 compliant,

Bluetooth® 5.2 certified

Range 80 m
Available transmission power levels Up to 8 dBm
Sensitivity -88 dBm
Casing
Protection IP67
Mounting Two holes to screw/leash/strip, tape
Customization Custom logo upon request (Special conditions)
Environmental Requirements
Humidity (non-condensing) From 0% to 100%
Operational temperature -20°C / +60°C (-4°F / +140°F)
Protocols compatibility
iBeacon Yes

*iOS doesn't show devices with iBeacon protocol

Eddystone Yes
EYE Sensor Yes

Dimensions

Eye dimensions.png

Value-adding Features

Hibernate mode

Hibernated mode means that the EYE device is OFF when shipping from the factory, preserving battery life. PLEASE NOTE that EYE devices are available in two modes: factory-activated (ON) or Hibernated (OFF). You may order the device version which better suits your needs. Order codes are described on eye page

Value of hibernate mode

Hibernated versions of EYE devices simplify stock management for our partners while maximizing battery life.
1. Accelerated delivery times:

By stocking up on hibernated EYE devices, you ensure readiness to deploy EYE devices with full battery capacity at any moment. This proactive approach provides fastest possible service, increases your reputation for efficiency and positions you as an industry frontrunner, enhancing your competitive edge.

2. Mitigated project risks:

In scenarios where projects encounter unforeseen challenges, our hibernated EYE devices offer a buffer. Hibernate feature allows to safeguard your investments and potential revenue streams. This means that even if projects encounter delays or complications, you can still deploy EYE devices with full battery capacity, ensuring optimal performance when the time is right.

How to activate hibernated eye device?

Attach any magnet to sleeping device and wait for LED to blink.
NOTE: ANY MAGNET CAN BE USED
520746 Magnet EYE gif v1.6-min.gif
Now device is discoverable, scannable, connectable via BLE.

How to send the device to hibernate mode?

If you want to put the EYE device back to hibernate mode after accidental activation or simply pause its use, you may do that following steps below:
Step 1. While connected and in overview tap "Send device to sleep":
Step 2. Confirm your selection:
Step 3. Wait for EYE App to disconnect:
Device screen 1.2.8 2.jpgScreenshot 20230509 173323 EYE APP.jpgScreenshot 20230512 164509 Gallery.jpg

Can All devices hibernate?

1. All EYE Sensors with firmware version starting from 1.2.9.R.8 can hibernate.

2. Only new EYE Beacons bought with order codes that have hardware modification can hibernate standard codes are available in eye page, for special order codes consult your sales manager.