FM3001 Auto Geofence Settings

From Wiki Knowledge Base | Teltonika GPS
Revision as of 21:42, 15 October 2019 by Tomas.kriauciunas (talk | contribs) (Protected "FM3001 Auto Geofence Settings" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)))

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > EOL Products > FM3001 > FM3001 Configuration > FM3001 Auto Geofence Settings
FM3001 autogeofence.jpg

AutoGeofence is based on the last known position after the movement has stopped. You can be notified using this function if your car is taken away. The shape and size of Geofence zones are set by parameters. It is possible to state whether entering or leaving the geofence triggers an asynchronous message. AutoGeofencing options can be configured by following parameters as depicted in the right hand side figure:
Activation timeout defines the delay between the creation of AutoGeofence within set Radius value around vehicle's most recent position and when the ignition is off. Note that AutoGeofencing does not require entering coordinates, instead it requires GPS visibility. Event generation can take place on Geofence Entrance, Exit or On Both. Eventual Records is used to enable or disable Eventual Records functionality.

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=FM3001_Auto_Geofence_Settings&oldid=46431"