FM6300 Product Change Notifications

From Wiki Knowledge Base | Teltonika GPS
Revision as of 12:44, 16 April 2021 by SandraG (talk | contribs)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > EOL Products > FM6300 > FM6300 Product Change Notifications

Product change notifications (PCN) is the way of informing customers of upcoming changes related to Teltonika products. This includes outward appearance adjustments, hardware improvements, firmware changes, changes to package contents, etc. This page stores information regarding changes to the FM6300 tracking device. Below you will find a list of both upcoming and already implemented changes sorted from newest to oldest (top to bottom).

2020.11.24: GNSS antenna changes

We would like to inform you about the GNSS antenna changes for FM6300 starting from late December 2020 - early January 2021.

Change description
Change type Mechanical part changes
Detailed description
Old version: GNSS 2 4 .png


Dimensions - 45.2x35.8x15.1 mm
Center frequency - 1575.42 MHz, 1600 MHz
Bandwidth - 10 MHz
VSWR on bandwidth - <1.5
GAIN - 3 dB
LNA minimum gain - 26 dB
LNA maximum gain - 30 dB
Consumption - 11 mA

New version: GNSS 2.5 .png


Dimensions - 46x44x13 mm
Center frequency - 1575.42 MHz, 1602 MHz
Bandwidth - 35 MHz
VSWR on bandwidth - <1.9
GAIN - 3 dB
LNA minimum gain - 26.5 dB
LNA maximum gain - 29.5 dB
Consumption - 9 mA

Change reasons According to technical comparison new antenna is better by next parameters: center frequency, bandwidth, consumption. Other parameters are the same. Moreover, the new antenna is thinner, which gives the opportunity to mount it, where it was not possible before and makes installation easier.
Product release date Late December 2020 - Early January 2021
Affected products
Model Affected order codes Order code changes
FM6300 FM6300*******order codes No changes
Change impact
Risk assessment No risk factors encountered with this change
Suggested implementation plan No implementation plan needed

2020.08.10: Base firmware update

We would like to inform you about the base firmware update for FM6300 starting from August 10th, 2020. New production firmware version will be 01.00.34.

Change description
Change type Firmware update
Detailed description Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/FM6300_firmware_errata
Old version:
FM6300 01.00.17
New version:
FM6300 01.00.34
Change reasons FM6300 base firmware version update
Product release date 2020 August 10th.

2019.07.22: new no brand Eco friendly boxes

Effective September 2019, FM6300 trackers with no brand packaging will be shipped with a new no brand eco-friendly box.

Change description
Change type Packaging
Detailed description Improved and more environmentally friendly packaging box
Old single packaging version:

Medium-white1-cut.png

Dimensions: 177 (W) x 145 (D) x 64 (H)
New single packaging version:
Medium-eco-cut.png

Dimensions: 173 (W) x 148 (D) x 71 (H)
Change reasons The new box is better for the environment
Product release date Devices with new packaging will be released in manufacturing from September with 2 months of transition period. Over this period devices with white packaging can be delivered as well as devices with the new eco boxes.
Affected products
Model Affected order codes Order code changes
FMB640, FMB630, FM6300. FMB640******, FMB630******, FM6300******. No changes
Change impact
Risk assessment No risk factors encountered with this change
Suggested implementation plan Due to the new look of boxes we strongly recommend to update your marketing materials. Because of the new color of the packaging box, if necessary, update your branding materials (stickers, logo layouts).
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above

2019.04.10: IMEI/SN display on device Changes

We would like to inform you, that IMEI/SN info display on the FM6300 device will be updated in the factory from June 2019.

Change description
Change type External/visual
Detailed description IMEI/SN info on device display change from barcode to QR
Old Version:
IMEI SN Barcode 10x25mm.png
New Version:
IMEI SN QR 10x25mm.png
This change will not affect device packing and logistic lists. It will remain as barcode.
Packing and list.png
Change reasons QR format will increase reliability and minimize error rate, because of the error correction feature and improved reading in low contrast.
Product release date Devices with new QR Code format will be released in manufacturing from June with 2 months of transition period. Over this period devices with barcode can be delivered as well as devices with QR code.
Affected products
Model Affected order codes Order code changes
FM6300 FM6300****** No changes
Change impact
Risk assessment Risk assessment for devices managament required
Suggested implementation plan Due to changes in device information display we strongly recommend to check, and prepare your tools to read QR codes.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above

To download the pdf version of this notification, click here.

2019.02.18: Top Tampography Changes

We would like to inform you, that tampography of the FM6300 device was updated in the factory on the 18th of March.

Change description
Change type External/visual
Detailed description Top tampography design changed
Old Version:
FM6300oldtampblack .png
New Version:
FM6300newblack.png
Change reasons 1. Updated Teltonika address to Saltoniskiu st. 9B-1
2. Added WEEE label. (WEEE - Waste from Electrical and Electronic Equipment)
Product release date Updated tampography will be used from the time when the stock will be sold all leftovers.
Affected products
Model Affected order codes Order code changes
FM6300 FM6300******* No changes
Change impact
Risk assessment No risk factors encountered with this change
Suggested implementation plan Due to changes in device appearance we strongly recommend to contact your customs agent with our change log information, to avoid any unexpected delays in customs clearance process.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above

To download the pdf version of this notification, click here.

2019.01.18: new eco friendly box

Effective January 2019, week 4, FM6300 trackers will be packed with a new eco-friendly box.

Change description
Change type Packaging
Detailed description Improved and more environmentally friendly packaging box
Old version:
Device packaging box tilted.png
New version:
Eco friendly packaging box tilted.png
Change reasons The new box is better for the environment
Product release date January 2019, week 4
Affected products
Model Affected order codes Order code changes
FM6300 FM6300****** No changes
Change impact
Risk assessment No risk factors encountered with this change
Suggested implementation plan Due to changes in device appearance we strongly recommend to contact your customs agent with our change log information, to avoid any unexpected delays in customs clearance process.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above

To download the pdf version of this notification, click here.