Changes

==Autoscan on init feature==

==Autoscan on init feature==

'''Autoscan on init feature will only work with these conditions''':

'''Autoscan on init feature will only work with these conditions''':

·        Device has a program number 11120 or 11130;

·        Device has a program number 11120 or 11130;

'''Step 1.'''

'''Step 1.'''

Update FMB140 firmware to ''FMB.Ver.03.25.15.Rev.143''

Update FMB140 firmware to the newest FW version [[FMB140 firmware errata]].

'''Step 2.'''  

'''Step 2.'''  

|+

|+

|[[File:Bw_nb.png|link=https://wiki.teltonika-gps.com/view/File:Bw_nb.png|50x50px]]

|[[File:Bw_nb.png|link=https://wiki.teltonika-gps.com/view/File:Bw_nb.png|50x50px]]

|If scanning through OBD-II port (diagnostic connector) goes unsuccessfully, try connecting CAN1L and CAN1H wires directly to vehicle CAN bus using [[MINI-CAN|Mini-CAN]] contactless reader (look for a pair of twisted wires near vehicle ECU) .

|If scanning through OBD-II port (diagnostic connector) goes unsuccessfully, try connecting CAN1L and CAN1H wires directly to vehicle CAN bus using [[ECAN01]] or      [[MINI-CAN|Mini-CAN]] contactless reader (look for a pair of twisted wires near vehicle ECU) .

|}

|}

[[File:Twist.png|center|frameless]]

[[File:Twist.png|center|frameless]]