Difference between revisions of "FMB202 Installation instruction"

From Wiki Knowledge Base | Teltonika GPS
m
 
(12 intermediate revisions by 2 users not shown)
Line 1: Line 1:
−
FMB2YX is the device that has internal GNSS and GSM antenna. <br>
+
{{
−
Internal GNSS antenna device should be mounted with the sticker view to the open sky
+
Template:FMB2_Installation_instruction
−
(metal free) with not less than ¾ of metal free area as shown in figure below.  <br/>
+
|model=FMB202
−
 
+
}}
−
[[File:Metal_free_zone_illustration.png|thumb|400px|center|upright=0.35|FMB2YX]]
+
[[Category:FMB202 Manual|2]]
−
<br/>
 
−
FMB2YX has IP67 protection class. Top performance is reached if mounted outside of the
 
−
vehicle.<br>
 
−
The device has 4 mounting holes on the edges, and can be tightened with screws, adhesive
 
−
tape or plastic straps.<br>
 
−
FMB2YX area with sticker and GNSS antenna is shown in figure below. <br>
 
−
 
 
−
[[File:FMB2YX_Metal_free_direction.png|thumb|400px|center|upright=0.35|FMB2YX]]
 

Latest revision as of 16:26, 7 December 2021

Main Page > Advanced Trackers > FMB202 > FMB202 Manual > FMB202 Installation instruction

Possible mounting zones

Trucks

It is strongly recommended to mount FMB202 outside of the vehicle with the sticker direction to the sky.
Trucks.png

Most commercial trucks have plastic hood in front of the vehicle. It is recommended to mount FMB202 under the hood. Power cord output of the device should be at the bottom. If it is not possible, if a front hood is made of some kind of metal, the device can be mounted inside the car on the front panel as close as possible to the front window.
Truck Inside.png


Tractors

It is strongly recommended to mount FMB202 outside of the vehicle with the sticker direction to the sky.
Tractors.png

Motor bikes

FMB202 device should be mounted on outside.
Possible mounting places for motorbikes.png

FMB202 cannot be mounted under the seat!
Not mount device under seat.png

Light vehicles

Most light vehicles has oblique front window that opens most part of interior front panel. FMB202 can be mounted under the plastic panel behind the front window, with the sticker direction to a window (sky).
Light Vehicles.png

Recommended mounting positions

Best FMB202 mounting position is outside of vehicle with any metal above the device. Recommended deviation from horizontal axis of vehicle max 3-5°.
Mounting positions.png

Mounting position and recommended deviation from longitudinal axis of vehicle ±2°.
Mounting positions v2.png

Restrictions

FMB202 device can not be mounted inside in the vehicle door!
Inside door.png

FMB202 device cannot be mounted inside the vehicle!
Inside vehicles.png

Connecting power wires

  1. Device should be connected directly to battery. Power supply: 6V/12V/24V.
  2. If FMB202 is used in 6V system and power cables are extended.

Extension cable resistance should be less than 60 mΩ in sum of both, positive and negative, wires. 30 mΩ for single wire.
FMB2YX connection to the car circuit.png

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=FMB202_Installation_instruction&oldid=69234"